Nominate/Submit Case Studies

Become a Featured Company

Air Technology Systems

Air Technology Systems (ATS) have been designing and supplying ventilation and odour control solutions to the water industry for over 20 years. Working closely with the main contractors/M&E Contractors in the industry, we have installed our systems into all major water companies.

Our Range of services include:

Surveys of existing ventilation and odour control systems.
Upgrades, maintenance and modification of existing systems.
The design, supply, installation and commissioning of new ventilation and odour control systems.
We have our own experienced installation teams.
We have our own NIC EIC registered electrical engineers.
We work collaboratively with the client to ensure that the system design is optimised and meets the primary objectives e.g TOTEX, Level of performance etc.

VENTILATION

Our ventilation solutions are a combination of traditional and propriety techniques, including our innovative JETFLO system which maximises the ventilation efficiency and can reduce the overall extract volume, excellent for reducing condensation and ensuring fresh air is delivered where needed, this not only reduces energy consumption, but can reduce the size and cost of odour control units.

ODOUR CONTROL

Our unique alliance with Europe’s largest manufacturers of specialist odour control products, CMI Europe Environment, is a major strength.

We can offer all proven odour control technologies, from carbon filtration and catalytic dry scrubbers, through to bio filtration and chemical scrubbing. Solutions often require a combination of these techniques. All equipment on the odour control plinth is sourced from CMI EE’s state of the art facility and is pre-assembled for inspection prior to dispatch. This provides us with a unique level of quality control.

Our specialist rope access division allows us to gain access to places where mechanical scaffold/access is going to be either very difficult or cost prohibitive.

Our wide range of expertise design and project management experience, combined with close collaboration with the client is the reason we have an excellent reputation in the industry.

Sundon Water Treatment Facility (2024)

A novel water treatment plant constructed on the site of an upgraded reservoir to aid Affinity Water’s environmental sustainability commitments

Witches Oak WTW: Green Recovery - Decarbonising Water Resources (2024)

The challenges of designing and constructing the Witches Oak programme of works on multiple sites to a condensed timescale

Burnley WwTW Catchment Strategy (2023)

The Burnley integrated catchment scheme is one of United Utilities’ (UU) largest AMP7 projects with a value of £77m. The project is being delivered by UU’s construction delivery partner (CDP) framework by Advance-plus, a joint venture between MWH Treatment, J Murphy & Sons (JMS) and Stantec UK. The project commenced in 2020 and through two […]

Goddards Green WwTW (2023)

Goddards Green Wastewater Treatment Works (WwTW) is a Sludge Treatment Centre (STC) located near Burgess Hill in West Sussex. The catchment serves the towns of Burgess Hill, Hassocks, Hurstpierpoint and surrounding villages, providing for 54,789 people. The project implements an innovative approach to mitigate the likely odour from the processes at the WwTW to prevent […]

Hampton Loade WTW (2023)

Hampton Loade WTW treats raw water from Chelmarsh Reservoir, located approximately two miles north-west of the site. The reservoir is supplied by the river intake pumps located within the intake building immediately adjacent to the River Severn. The maximum flow that can gravitate to the works from the reservoir is 130-135 megalitres/day (MLD). To increase […]

Seedy Mill WTW (2023)

Seedy Mill WTW treats surface water from the Blithfield Reservoir. The existing supply to the works is gravity-fed up to a maximum of 85 MLD. Additional yield could be provided by utilising three in-line booster pumps located at Nethertown. In addition, there are two individual borehole contributions at Seedy Mill and Trent Valley, which can […]

Riding Mill Raw Water Pumping Station (2022)

When constructed in 1979, as part of the Kielder Transfer Scheme, Riding Mill Pumping Station was the largest pumping station in Britain. Abstracting flows from the River Tyne, it enables Northumbrian Water (NWG) to transfer water from Kielder Reservoir to the Derwent, Wear and Tees rivers, whilst supporting the operation of Mosswood WTW. The site […]

Church Wilne WTW (2020)

Situated on the Derbyshire/Nottinghamshire border, Church Wilne WTW serves 600,000 Severn Trent (ST) customers in the East Midlands. Built in 1967 to extract and treat 27 ML/day from the River Derwent, the works has been extended twice to 135 ML/day meeting the needs of both a growing population and increased water quality standards. However, the […]

Rugby STW - BioMag Plant (2020)

Rugby STW is situated on the south bank of the River Avon, approximately 1km north of the town of Rugby in Warwickshire. Final effluent from Rugby STW is discharged into the River Avon and needs to meet permits set by the Water Framework Directive (WFD). It provides sewage treatment to a population of circa 107,975. […]

Woolston WwT Scheme - Part 4 (2019)

Woolston WwTW uses a conventional activated sludge plant (ASP), built in 1966, treating sewage flows from part of the Southampton conurbation, serving a population of approximately 62,000 people. The site occupies an area of 1.26 hectares. The existing sewerage system which feeds into the WwTW collects both wastewater and stormwater from the Woolston catchment area. […]

Deephams STW - A630 Major Upgrade (2018)

Thames Water’s Deephams Sewage Treatment Works (STW) is located in Edmonton, North London and treats a 989,000 population. Three drainage catchment areas of Lea Valley, High Barnet and Tottenham flow to the works, the ninth largest plant in the UK. The original effluent treatment process was built between 1956-1966 and had been updated at various […]

Prioress Mill Raw Water Pumping Station (2018)

Prioress Mill Raw Water Pumping station (RWPS) is located in Rhadyr, near Llancayo, Monmouthshire, on the south bank of the River Usk. It abstracts at a rate of up to 318 ML/day, and is the primary supply to Llandegfedd reservoir, which then feeds Sluvad Water Treatment Works (WTW). Prioress Mill RWPS has been identified by […]

Woolston WwT Scheme - Part 3 (2018)

Built in 1966, Woolston Wastewater Treatment Works (WwTW) uses a conventional Activated Sludge Plant (ASP) to treat sewage flows from part of the Southampton conurbation. Serving a population of approximately 62,000, the site occupies an area of 1.26 hectares. The existing sewerage system which feeds into the WwTW collects both wastewater and stormwater from the […]

Saltend WwTW (2017)

Yorkshire Water’s Saltend WwTW had a history of environmental under-performance which resulted in a significant number of customer complaints due to odour. Between September 2015 and May 2016, £18m of refurbishment and upgrade work was carried out on a fast track basis to improve this performance. Commercial arrangements were adjusted from normal framework conditions to […]

Woolston WwT Scheme - Part 2 (2017)

Built in 1966, Southern Water’s Woolston WwTW uses conventional activated sludge plant (ASP) to treat sewage flows from part of the Southampton conurbation, serving a population of approximately 62,000 people. The site occupies an area of 1.26 hectares. The existing sewerage system which feeds into the WwTW collects both wastewater and stormwater from the Woolston […]

Woolston WwT Scheme - Part 1 (2016)

Construction works are now in their second year on Southern Water’s £63 million environmental improvement scheme to redevelop and completely modernise Woolston WwTW. (The first year of the Woolston WwT Scheme was detailed in the 2015 edition of UK Water Projects). The existing works uses a conventional activated sludge plant (ASP), built in 1966, treating […]

What we do:

Plant & Equipment: HVAC | Odour Control | Ventilation