Supply Chain - Concrete Works - Concrete Repair

Anglian Water’s Strategic Pipeline Programme is one of the most ambitious infrastructure programmes ever undertaken within the UK water sector. Spanning more than 500 kilometres of interconnected pipelines, pumping stations and treatment assets, the programme will fundamentally change how water is moved across the Anglian Water region, providing long-term resilience for millions of customers. Located at the head of the 52km East-to-Lincolnshire (E2L) Strategic Pipeline, Elsham Reservoir will be a pivotal site within the network. Introduction

Anglian Water’s @one Alliance is currently delivering the Elsham Reservoir Scheme in close collaboration with the Strategic Pipeline Alliance (SPA). The scheme comprises a new high-capacity pumping station, a conditioning plant, storage reservoir, lagoon infrastructure and extensive cross-site pipelines and valve controls.

Together, these assets are being delivered to enable treated water from East Lincolnshire to be safely conditioned, stored and transferred into the wider strategic grid.

Once fully operational, Elsham Reservoir will be a key asset within Anglian Water’s future water supply strategy, providing both hydraulic capability and operational flexibility. The scheme is being delivered using a collaborative alliance model, with early contractor involvement, integrated design and construction, and a strong focus on digital enablement and carbon reduction.

As construction progresses on site, Elsham is already demonstrating how large-scale strategic assets can be delivered in a way that balances resilience, environmental responsibility and long-term value for customers. The project is not only addressing immediate supply challenges, but is also being developed as a digitally enabled, future-ready asset that will support Anglian Water’s network for decades to come.

[caption id="attachment_28791" align="alignnone" width="1200"] Reservoir precast wall panel installation - Courtesy of @one Alliance[/caption] The issue

Anglian Water’s supply demand balance is under increasing pressure as a result of several converging long-term challenges; population growth across the East of England continues at one of the fastest rates in the UK, with significant housing and commercial developments planned over the coming decades. This growth is driving a sustained increase in water demand and placing additional strain on existing sources and infrastructure.

Climate change is compounding these pressures. Hotter, drier summers, changing rainfall patterns and an increased frequency of drought events are reducing the reliability of traditional water sources. Local abstractions, which have historically underpinned supply in many areas, are becoming increasingly vulnerable during prolonged dry periods. This is reducing the overall resilience of the network and increasing the risk of supply interruptions.

At the same time, environmental protection and resilience requirements continue to tighten, and Anglian Water must meet its statutory obligations under the Water Resources Management Plan 2019 (WRMP19), while also protecting sensitive watercourses, wetlands and habitats. Environmental legislation increasingly limits abstraction from vulnerable sources, particularly during periods of environmental stress, requiring alternative approaches to balancing supply and demand.

WRMP19 identified the need for strategic transfers to move water from areas of relative surplus to areas of higher demand. Within this context, the East-to-Lincolnshire strategic pipeline was identified as a critical intervention. To enable water from East Lincolnshire to be transferred into this pipeline, a conditioning plant at Elsham was required to ensure water quality, compatibility and compliance with regulatory standards.

Without the intervention of this project, delivered by the @one Alliance, Anglian Water would face increased risks to security of supply, greater reliance on environmentally sensitive abstractions, and potential non-compliance with statutory obligations. The Elsham scheme is therefore being progressed as a element of Anglian Water’s Best Value Plan, addressing both immediate operational risks and long-term resilience challenges, while aligning with environmental and regulatory requirements.

[caption id="attachment_28789" align="alignnone" width="1200"] Reservoir precast wall panel installation - Courtesy of @one Alliance[/caption] Elsham Reservoir Scheme: Supply chain - key participants

The Elsham Reservoir Scheme is being delivered through a collaborative supply chain, with early contractor involvement and strong integration across disciplines.

Project delivery: @one Alliance Principal contractor: Skanska Site engineering services: East Anglian Site Engineering Reservoir: FLI Precast Solutions Civils contractor (ECI & main works): Bell Formwork & Civil Engineering Services Ltd SMR (for sub-base construction): Richardson Recycling Low-carbon pipeline system: Saint Gobain PAM UK MEICA subcontractor: FSD MEICA subcontractor: Glasswell & Last MCCs (high-lift PS & chlorine building): Cema Ltd Pumps: SPP Pumps Ltd Valves: AVK UK Ltd Gantry cranes: ABUS Crane Systems Ltd Ortho dosing kiosk: Lintott Control Systems HV Equipment: Power Testing Ltd Steel buildings: North Lincs Structures Ltd Sample kiosk & security access hatches: Technocover Generator: Stuart Power Generator fuel tank: AVK-SEG Site accommodation & storage: Algeco UK Ltd Fencing & barriers: Heras Mobile Fencing & Security Ltd Lagoon Liner: ARM Plant hire: Q Crane & Plant Hire Ltd Plant hire: Flannery Plant Hire (Oval) Ltd

This integrated approach is ensuring that expertise from across the supply chain is being harnessed to deliver a high-quality, resilient solution that provides long-term value.

[caption id="attachment_28788" align="alignnone" width="1200"] Construction of the new reservoir - Courtesy of @one Alliance[/caption] The solution

The solution being delivered at Elsham is a fully integrated set of assets designed to work together as part of the wider strategic pipeline system.

Conditioning plant

The new water conditioning plant will dose chlorine and ortho phosphoric acid to ensure that water transferred from East Lincolnshire is safe, stable and compatible with the wider network.

This facility is being constructed with resilience, maintainability and future operational flexibility at the forefront of the design.

Pumping station

To support the conditioning plant, a new pumping station is currently being constructed to provide the hydraulic capacity required to transfer large volumes of treated water into the strategic pipeline. The pumping station is being designed to operate efficiently across a range of demand scenarios, providing the ability to respond dynamically to changing network conditions.

Storage reservoir

A new storage reservoir is being delivered alongside the pumping station, providing operational flexibility. The reservoir is designed to balance fluctuations in demand, smooth operational transitions and provide a buffer during maintenance activities or unplanned network events. This storage capacity significantly enhances the resilience of the system and reduces the risk of supply interruptions.

Lagoon & secondary pumping station

The solution also includes a lagoon and secondary pumping station, which are being constructed to support on-site water management and enhance overall system reliability. These assets are enabling controlled management of flows and supporting safe and efficient operation under a range of conditions.

Pipelines

Nearly 1.6 kilometres of additional cross-site pipelines, comprising 600mm and 700mm ductile iron mains, are being installed to integrate the Elsham assets into the wider E2L transfer system. Associated valve controls, including actuated and interlocked valves, are being provided to allow flexible and secure operation of the site within the strategic network.

[caption id="attachment_28792" align="alignnone" width="1200"] Reservoir roof installation underway - Courtesy of @one Alliance[/caption] Innovations & carbon savings

A defining feature of the scheme is its integration into Anglian Water’s Digital Twin Programme. The site is being delivered as both a physical and virtual asset, with a detailed digital replica developed alongside construction.

This digital twin will enable real-time monitoring, predictive maintenance and scenario modelling, supporting improved operational decision-making and long-term efficiency.

Carbon reduction has been embedded into the solution from the outset and these measures are delivering substantial carbon savings while maintaining performance and resilience.

Design decisions the actively reducing embodied carbon, include tarmacing in place of concrete for internal roads where possible, the use of secondary materials such as SMR for sub-base construction, optimisation of generator sizing and fuel storage, and increased use of GGBS within concrete mixes.

The project also utilises innovative low-carbon pipework supplied by Saint Gobain PAM UK. This installation is one of only four globally and the first in the UK, to deploy this technology. Compared with conventional alternatives, it is projected to achieve carbon reductions of more than 80%.

As construction progresses, the benefits of this integrated solution are becoming clear. The scheme is enhancing security of supply, reducing reliance on environmentally sensitive abstractions, and providing a flexible, future-ready asset that supports Anglian Water’s long-term strategic objectives.

[caption id="attachment_28793" align="alignnone" width="1200"] New reservoir site overview - Courtesy of @one Alliance[/caption] Conclusion

The project is a critical step forward in Anglian Water’s journey towards a more resilient, adaptive and sustainable water network. As works continue on site, the project is already demonstrating how strategic infrastructure can be delivered through collaboration, innovation and a clear focus on long-term outcomes.

By enabling the transfer of treated water into the strategic pipeline, Elsham Reservoir will strengthen regional resilience, support compliance with WRMP19 obligations and protect the environment by reducing reliance on stressed local sources. The integration of digital twin technology and embedded carbon reduction measures ensures that the asset is not only fit for today’s challenges, but also ready to adapt to those of the future.

In the wider context of the Strategic Pipeline Programme, Elsham is more than a single site. It is a foundational asset that underpins Anglian Water’s strategic vision, helping to secure reliable water supplies for customers and communities for generations to come.

The requirement of the Burnley Integrated Catchment Scheme is the River Water Quality Improvement for the Water Framework Directive (WFD) driver identified in the Water Industry National Environmental Programme (WINEP) to achieve a ‘Good’ status in the defined reaches of Pendle Water and the River Calder. The project, which commenced in 2020, is one of United Utilities’ largest AMP7 investments and is being delivered by Advance-plus, a joint venture between MWH Treatment, J Murphy & Sons (JMS) and Stantec UK. In previous articles published by Water Projects, United Utilities has shared the project journey from concept, solution design development, and construction. This case study focuses on the project team’s experience in achieving effective project outcomes. Project requirements & summary

To meet ‘Good’ status in Pendle Water and the River Calder, the treatment capability at Burnley Wastewater Treatment Works (WwTW) had to be enhanced to achieve compliance with the new treated effluent permit standards, coupled with management of storm discharges in the defined reaches, to achieve compliance with the WFD 99%ile wet weather intermittent standards. There are eight regulatory drivers attached to this WFD element of the scheme.

The project also includes two additional regulatory drivers for U_MON3 spill monitoring and U_MON4 flow monitoring.

Through complex river water quality and network modelling, the lowest whole life cost integrated catchment solution was determined and developed.

The Integrated Catchment Solution comprised four sites, which are all inter-dependent in delivering the regulatory outputs.

[caption id="attachment_26729" align="alignnone" width="1200"] Modification of existing PSTs 6, 7, 8 and 9 - Courtesy of United Utilities[/caption] Burnley WwTW

Serving a domestic population equivalent of approximately 107,000 plus trade load, Burnley WwTW has undergone a significant upgrade during this AMP7 project with the scope comprising the design, construction, and commissioning of:

A new Evoqua BioMag® activated sludge plant (ASP) from Xylem Water Solutions. The BioMag® system enhances conventional biological wastewater treatment by using magnetite (an iron oxide powder) to ballast the microbiological floc, creating an increase in mixed liquor suspended solids (MLSS) in the ASP and enhanced performance in the final settlement tanks (FSTs). A new 64-panel, 12,000m3 detention tank constructed by A-Consult Ltd with associated feed pumping station. A new additional (4th) primary settlement tank. A new 2500 l/s interstage pumping station (pass forward of FtFT and RAS flows). Refurbishment of the four existing FSTs. A new surplus activated sludge (SAS) thickening process. A new ferric and caustic chemical dosing plants. New MCCs, SCADA upgrade and power upgrade. U_MON3 event duration monitoring on spills to storm tanks. U_MON4 flow monitoring.

The final effluent quality for the new works at Burnley WwTW is to comply with both WRA (spot samples) and UWWTD (composite samples):

Design Permit WRA Parameter Average 95% ile Upper Tier Limit BOD 9 mg/l 50 mg/l Solids 40 mg/l Ammonia 2 mg/l 12 mg/l Total P 0.25 mg/l Iron 4 mg/l 8 mg/l Design Permit UWWTD Composite Samples Parameter Compliance Requirement Upper Tier Limit BOD 25 mg/l (or 70% removal) 50 mg/l COD 125 mg/l (or 75% removal) 250 mg/l Total P 2 mg/l (or 80% removal) [caption id="attachment_26728" align="alignnone" width="1200"] Evoqua BioMag® activated sludge plant - Courtesy of United Utilities[/caption] Burnley WwTW Catchment Strategy: Supply chain - key participants Client: United Utilities Construction Delivery Partner: Advance-plus JV MWH Treatment (Advance-plus jv) J Murphy & Sons (Advance-plus jv) Stantec UK (Advance-plus jv) Civil design detention tank: COWI UK Ltd Physical modelling: Hydrotec Consultants Ltd Dewatering design: OGI Groundwater Specialists Ltd Dewatering: Alba Dewatering Services Ltd Concrete construction: STAM Construction Ltd Detention tank shaft: Joseph Gallagher Ltd Pump station shaft: EJ Kelly Sheet piling: Sheet Piling (UK) Ltd PCC driven piling: Van Elle Concrete cutting: Holemasters Temporary works/shoring: MGF Ltd Precast post tensioned tanks: A-Consult Ltd Precast roof sections: Macrete (Ireland) Ltd Precast shaft segments: FP McCann Blower building: Saredon Steel Buildings Ltd BioMag® building: Gallaway Construction Ltd Access metalwork: Tushingham Steel Fabricators Evoqua BioMag® process: Xylem Water Solutions BioMag® mechanical installation: Alpha Plus Ltd [caption id="attachment_26724" align="alignnone" width="1200"] Detention tank water test - Courtesy of United Utilities[/caption] Civils & pipework: SGC Civil engineering Ltd Pumping station mechanical installation: Fluid Sealing & Engineering (FSE) Transformers: Winder Power Electrical installation: PICOW Engineering Group MCCs: Technical Control Systems Ltd Systems integration: Tata Consultancy Services SAS glass coated steel tank: Stortec Engineering Ltd Dosing systems: NPS Engineering Group PST fixed scraper bridge: EPS Water Epoxy coated carbon steel pipework & wall starters: Freeflow Pipesystems Ltd SAS drum thickeners: Huber Technology Odour control system: Air-Water Treatments Ltd PST odour covers: Corporate Engineering Ductile iron pipework: Saint Gobain PAM UK Ductile iron pipework: Electrosteel Castings (UK) Ltd FST scraper bridge refurbishment: Jacopa Ltd Blowers: Sulzer Pumps Wastewater Ltd Aeration system: Suprafilt Ltd SAS tank air mixing system: Utile Engineering Submersible pumps: Xylem Water Solutions Valves: AVK UK Ltd Standby generators: DTGen Kiosks: Industrial GRP Ventilation: Air Technology Systems Ltd Lindred Road CSO (PEN0056)

Work at this existing combined sewer overflow (CSO) site comprised the construction of an online 1,950m3 detention tank to store storm waters during times of heavy rainfall and reducing discharges to the watercourse. New pumps within the tank return the effluent to the sewer for onward treatment at Burnley WwTW. A new MCC and power supply were installed for this facility.

[caption id="attachment_18286" align="alignnone" width="1200"] Lindred Road detention tank during construction - Courtesy of United Utilities & Advance-plus[/caption] Altham Outfall Fennyfold CSO (BUR0026)

This existing CSO site is located in the local town of Padiham and on the sewer network that transfers flows to Hyndburn WwTW for treatment. The solution at this site was to construct a new chamber over the downstream sewer, install a new ‘real time’ controlled actuated penstock valve that regulates and optimises flows passed forward to Hyndburn, whilst reducing spills from the existing CSO. A new control kiosk was also provided.

Hyndburn WwTW

Value engineering and engagement with the Environment Agency enabled a no-build solution to be accepted at Hyndburn WwTW site, with only the optimisation of existing storm tank emptying system necessary for compliance.

Process optimisation: update to previous report

New primary settlement tank No. 4

New primary settlement tank (PST) No. 4 desludge pump run/dwell timers have been optimised to provide primary sludge concentration to a target of ~3.5% ds w/w. Daily PST No. 4 sludge blanket dips are undertaken by ADP and UU Operations undertook routine measurement of primary sludge concentration to inform any occasional minor changes to desludge pump run/dwell timers. The set-points for the run/dwell timer of the PST No. 4 desludge pumps typically range from 9-12 minutes for the run phase and 45-60 minutes for the dwell phase. These set-points will be adjusted in the future to accommodate changes in operational conditions at the site, including those related to the current sludge treatment center. [caption id="attachment_26733" align="alignnone" width="1200"] PST4 with odour control cover - Courtesy of United Utilities[/caption] Interstage pumping station The new interstage pumping station (IPS) has been commissioned with close consideration of the operating level set-points as determined during detailed hydraulic design. Further optimisation of the recycled activated sludge (RAS) control flow rates was undertaken following an exceptionally dry and warm weather period during April-June 2025 which has then resulted in supplementary further optimisation of the IPS control set-points. To maintain a stable hydraulic gradient for control of RAS (via gravity) from the final settlement tanks, the IPS top water level has been further optimised at 2.5m set-point with an operating level set-point control band optimised across a 0.5m depth (as per design). The IPS pumps minimum/maximum operating speeds (32.5Hz and 50Hz respectively) have been further optimised to provide stable control to level set-point across the 0.5m operating level band and avoiding, as much as possible, pump start/stops during dry weather flow periods where pump minimum performance exceeds received flows into the pumping station. The IPS has operated generally in accordance with the initial duty/assist/assist cascading level control with PID control loop tuning set-points remaining generally unchanged since original turn of flows in early October 2024. Further optimisation of the IPS process control set-points is not envisaged in the future. [caption id="attachment_26725" align="alignnone" width="1200"] Interstage pumping station - Courtesy of United Utilities[/caption]

Process air blowers: The new process air blower package was initially commissioned with support from the supplier, Sulzer Water & Wastewater. The majority of operational set-points within the blower package system are standard defaults and did not require further optimisation. The assist blower start/stop changeover set-points were optimised during a subsequent Sulzer site visit to ensure stable operational transition, avoid unnecessary noise and prevent nuisance under/over pressure process trips.

The process air blower discharge header control set-point has been further optimised to 640 mbarg in attempt to minimise dissolved oxygen depletion during storm events. The occasional depletion of dissolved oxygen remains an issue during the extraordinary rate of change of incoming flows and loads often associated with these storm events.

The addition of alternative ‘Storm Mode’ process control may ultimately be required to fully remedy the situation. Further optimisation of the process air blower process control set-points may therefore be required in conjunction with implementation of future ‘Storm Mode’ process control philosophy.

New primary ferric sulphate dosing: Extensive and routine jar-testing to monitor the optimal primary ferric dose molar ratio dose to achieve target residual orthophosphate and Total Iron concentrations was undertaken during May and June 2025.

The primary ferric molar ratio dose providing optimal phosphate and iron control (~1mg/l orthophosphate and <20mg/l Total Iron concentrations in PST effluent), as determined during the Summer Completion Test, was 4.15 MR. For reference, the ‘as-commissioned’ diurnal orthophosphate base load profile is shown below.

[caption id="attachment_26740" align="alignnone" width="1200"] Burnley WwTW: Orthophosphate diurnal load profile - primary ferric LUT set-points (as commissioned November 2024) - Courtesy of United Utilities[/caption]

A summary of initial and subsequent primary ferric dosing MR dose ‘optimisation’ is provided below:

28 November 2024 Dosing commences at 5MR 11 December 2024 Dosing increased to 6MR to target 1mg/l orthophosphate in PST effluent 20 December 2024 Dosing reduced to 5MR in response to ASP ammonia breakthrough spikes 24 December 2024 Dosing reduced to 4MR in response to ASP ammonia breakthrough spikes 2 January 2025 Dosing paused in response to observed ASP ammonia breakthrough spikes 9 January 2025 Dosing recommenced at 2MR 11 February 2025 Dosing increased to 3MR to target 1mg/l orthophosphate in PST effluent 25 February 2025 Dosing increased to 3.5MR to target 1mg/l orthophosphate in PST effluent 6 March 2025 Dosing increased to 3.75MR to target 1mg/l orthophosphate in PST effluent 17 March 2025 Dosing reduced to 3.5MR in response to ASP ammonia breakthrough spikes 24 April 2025 Dosing increased to 3.75MR to target 1mg/l orthophosphate in PST effluent 30 April 2025 Dosing paused in response to observed FST iron breakthrough spikes 3 May 2025 Dosing recommenced at 4.5MR following jar testing 8 May 2025 Dosing reduced to 4.15MR in response to jar test results N/A No primary ferric MR change since 8/5/25

Routine, minor, operational changes to the primary ferric dosing set-points will remain a business-as-usual activity associated with normal wastewater treatment works operation in the future; and most notably, in response to envisaged seasonal variation and catchment characteristics.

Caustic dosing: An initial set-point of 7.1 pH units was adopted for interstage pH process control upon commencement of the Summer Completion Test. This control set-point has been further optimised on occasion and in agreement with/request by United Utilities Operations to 7.15 pH units to either reduce chemical consumption or in consideration of prevailing final effluent alkalinity measured value.

Routine, minor, operational changes to the interstage pH setpoint considering prevailing final effluent pH and alkalinity will remain a business-as-usual activity associated with normal wastewater treatment works operation in the future.

[caption id="attachment_26726" align="alignnone" width="1200"] Chemical dosing area - Courtesy of United Utilities[/caption]

Liquid polyelectrolyte dosing: The ‘sweetening’ dose set-point of 25 l/h per FST has been retained and a storm event %FtFT trigger setpoint of 75% (in line with Evoqua recommendation). During periods of low FtFT, the 25 l/h ‘sweetening’ dose set-point results in the liquid poly system batching around four times per day; ensuring that a fresh, but matured, make-up solution is available at all times in readiness for flash increase in FtFT or prolonged storm event.

The poly dose proportional set-point has been gradually reduced to the current value of 0.6 mg/l as active product. It is noted that the product selection and amount of liquid polyelectrolyte dosed is subject to EA permitting and, as such, strict limits on maximum poly dose rate applies (currently 3.2 mg/l maximum as active product).

Further optimisation of the liquid poly ‘proportional’ dose process control set-points is not envisaged as necessary in the future.

[caption id="attachment_26734" align="alignnone" width="1200"] New assets at Burnley WwTW - Courtesy of United Utilities[/caption]

Magnetite addition & recovery: Magnetite, an iron oxide powder, is added to the activated sludge process via the BioMag® system to provide mixed liquor enhanced settleability in the final settlement tanks by microbiological floc ‘ballasting’.

The new works was operated during Q1 of 2025 to maintain the magnetite : MLSS ratio at the target of approximately 2:1, which was necessary to achieve the necessary mixed liquor settleability performance as measured by Specific Stirred Volume Index (SSVI).

Control to the target ratio is effected by management of magnetite ‘top-up’ addition, and in consideration of daily surplus activated sludge wastage volume, which relies upon having a disposal route for SAS. Mixed liquor settleability performance matured naturally during Q2 of 2025 and the magnetite : MLSS ratio was coincidentally reduced to target of 1:1 by the reduction of magnetite ‘top-up’ addition to the design anticipated amount of 500 to 600 kg/d.

The historic magnetite : MLSS ratio data is shown in the graph below. It can be seen that magnetite : MLSS ratio has trended down since the Summer Completion Test and as such, the ‘top-up’ magnetite loading set-point has been increased slightly to compensate.

Routine operational changes to the daily magnetite loading rate will therefore remain a business-as-usual activity associated with normal wastewater treatment works operation in the future. [caption id="attachment_26722" align="alignnone" width="1200"] MLSS minus magnetite (true MLSS) and true MLSS : Magnetite ratio on-site tests and laboratory results - Courtesy of United Utilities[/caption]

Recycled activated sludge control: Further optimisation of the RAS control set-points was undertaken following the extended period of exceptionally dry and warm weather period during April-June 2025. During this dry weather period the RAS flow rate was maximised to design limitation of 1,040 l/s to best manage potential for denitrification within the FSTs and avoid rising sludge and scum formation where possible. RAS control to ‘FtFT Mode 1’ was adopted for control of RAS flows during the Summer Completion Test in accordance with a three-tiered banded philosophy as follows:

FtFT flow (l/s) RAS flow (l/s) <600 400 >600 <1000 600 >1000 750

The RAS control system has operated stably for many months, and no significant further optimisation is envisaged. However, routine operational changes to the RAS control rate or mode of operation will remain a business-as-usual activity associated with normal wastewater treatment works operation in the future.

Activated sludge plant: Routine control of MLSS concentration has remained by the conventional method of monitoring food to micro-organism ratio (F/M) to the design target ~0.08d-1, by assessment of sludge age against target of ~14 days and then by manual adjustment of the surplus activated sludge daily wastage volume.

Routine monitoring of the biological load on the ASP and as-required operational changes to the daily SAS wastage volume to maintain F/M ratio and sludge age within an acceptable range will remain a business-as-usual activity associated with normal wastewater treatment works operation in the future. The historic F/M ratio and sludge age data is shown below.

[caption id="attachment_26739" align="alignnone" width="1200"] F to M ratio and sludge age - Calculated using on-site tests and laboratory test results - Courtesy of United Utilities[/caption]

Similarly, routine microscopic analysis has been undertaken by UU labs to monitor and track filamentous (and other indicator bacteria) abundance.

Summary/conclusion

The Summer Completion Test was carried out by Advance-plus over a 28-day period between 21 July and 18 August 2025. From the test results, it is concluded that the new works has successfully demonstrated compliance with the requirements of:

CT1: Final effluent water quality compliance with site WRA Regulatory Permit limits for BOD, TSS, ammonia, Total Phosphorus, Total Iron and pH. The final effluent water quality adequate compliance with asset standard for alkalinity residual (noting routine pH set-point change made during completion test in response to slight reduction in background alkalinity). CT2: Final effluent water quality compliance with site UWWTD Regulatory Permit limits for BOD and COD. CT3: Final effluent water quality compliance with site UWWTD Regulatory Permit limits for Total Phosphorus. CT4: Magnetite recovery rate of the BioMag® process.

Comber is a small town in County Down, located on the shores of Strangford Lough, 4.5 miles from Newtownards and 12 miles from Belfast. All flows from the Comber Catchment arrive at Upper Crescent Wastewater Pumping Station (WwPS), which is the terminal pumping station that pumps flows to Ballyrickard Wastewater Treatment Works (WwTW) for treatment. A study on the drainage network of Ballyrickard/Comber was carried out in January 2010, which identified inadequacies in the system and made recommendations for improving and upgrading the network. Specifically, the study identified that Upper Crescent WwPS did not meet Northern Ireland Environmental Agency (NIEA) requirements for emergency storage volumes. It also identified that Upper Crescent WwPS had been experiencing frequent breakdowns that contributed to high operational costs. Existing works

Upper Crescent WwPS was constructed in the 1970s, and the site contains two pumping stations:

Wastewater pumping station: Pumps foul flows from the catchment to Ballyrickard WwTW in Newtownards for treatment. Storm pumping station: Services stormwater from the local catchment area during large storm events that can overwhelm the sewer network. This pumping station plays a key role in preventing out-of-sewer flooding within Comber during storm events and limits further discharges to Strangford Lough. [caption id="attachment_26824" align="alignnone" width="1200"] Existing site showing proximity of site to neighbouring properties and local park to the north - Courtesy of GRAHAM[/caption] Project team

As principal contractor and principal designer, GRAHAM Construction had overall responsibility to deliver the project on time and within budget. Enisca Brown Ltd was contracted for designing and delivering a turnkey MEICA, process design and build solution for the new works.

McAdam provided civil, structural, and geotechnical design services, including the initial enabling and investigatory works carried out at the Early Contractor Involvement (ECI) stage, as well as the detailed design for construction.

The contract delivery team worked in a collaborative manner with NI Water and their project manager AECOM, as well as key suppliers and subcontractors to deliver a robust, effective and modern wastewater pumping station and storm water storage facility. This allows for future growth within the catchment area and protects the environment from discharges during storm events.

Early Contractor Involvement (ECI)

In 2022, GRAHAM undertook Early Contractor Involvement to further develop the scope and complete detailed design for the main construction works. Due to the age of the existing pumping stations, rigorous investigations were carried out to determine their operation and control philosophy, condition and potential for imposing health and safety risks to operatives and the contract team.

The completion of the detailed design, ahead of main contract award, ensured cost certainty for NI Water and lessened the risk of delays due to design changes on site.

[caption id="attachment_26822" align="alignnone" width="1200"] Early excavation works on the cofferdam - Courtesy of GRAHAM[/caption] Upper Crescent WwPS: Supply chain - key participants Client: NI Water Project manager: AECOM Civil contractor: GRAHAM MEICA designer & contractor: Enisca Browne Ltd Civil, structural & geotechnical design: McAdam Cofferdam temporary works design: McErlain Consulting Sheet piling contractor: Ward Piling PLC software & commissioning: Enisca Browne Ltd PLC software & commissioning: Profitec Solutions Ltd Metalwork design/fabrication & installation: Evans Plant Pumps & mixers: Xylem Water Solutions Static storm screen: Eliquo Hydrok Ltd Access covers: JP Corry Pipes & fittings: APP Fusion Group Backup generator: AJ Power Ltd Lifting equipment: Walter Watson Lifting equipment: Barbour Engineering & Fabrication Site security fencing & gates: Kane Fencing Ltd [caption id="attachment_26825" align="alignnone" width="1200"] Installation of the sheet piles for the cofferdam - Courtesy of GRAHAM[/caption] Project description & scope

The existing Upper Crescent WwPS in Comber involved a 2-Phase upgrade plan to complete all activities required:

Phase 1: Early procurement of items with long lead-in times and site preparation:

Early procurement of items such as generator, overflow screen, gantry crane and MCC panel. Relocation of several deep incoming sewer lines around the footprint of the cofferdam. Installation of new motor control panels for the existing Storm PS and new Wastewater PS to ensure uninterrupted operations. Relocation of overhead NIE (Northern Ireland Electricity) cables. Installation of a new upsized NIE transformer. Installation of a new 550kVA backup generator. New NIE incomer panel for connection point to the new NIE TX from the new 550KVA diesel generator.

Phase 2: Construction

Further site investigation works. Construction of new wastewater pumping station. Construction of new valve and flowmeter chambers. Installation of M&E equipment including three pumps, two mixers and static overflow screen. Construction of new inlet and overflow sewers. Construction of new rising main. Demolition of existing wastewater pumping station and associated apparatus. Landscaping and reinstatement. [caption id="attachment_26819" align="alignnone" width="1200"] Final excavation to formation level (minus 10m below ground level) within the cofferdam - Courtesy of GRAHAM[/caption] Construction

One of the biggest challenges was that the two adjacent pumping stations had to remain operational throughout the entire construction phase. The new Upper Crescent WwPS and 687m3 of stormwater storage required the construction of a 26m diameter x 10m deep cofferdam and the new WwPS could not be commissioned until the existing had been decommissioned.

Screw pumps: Each of the screw pumps within the Upper Crescent Storm Pumping Station was individually phased over to the new control panel in a lengthy process, which required a test period of each pump before the next pump could be phased over. Staged changeover was required due to the criticality of their operation during storm events. The pumps could not be taken out of service during storm events due to the potential of out-of-sewer flooding in low lying areas within the Comber Catchment.

Cofferdam construction: Once the programmed critical works within Phase 1 were complete, Phase 2 works could commence on the construction of the circular cofferdam. This was undertaken by specialist piling contractor Ward Piling Ltd with responsibility for:

Temporary works design. Sheet pile installation. Dewatering well installation. Construction of three circular concrete ring beams. Excavation of the cofferdam. Dewatering of the excavation.

A secondary 3-sided cofferdam was also constructed adjacent to the main cofferdam to facilitate the construction of a new inlet manhole.

[caption id="attachment_26828" align="alignnone" width="1200"] Completed cofferdam and 280 ton crawler crane - Courtesy of GRAHAM[/caption]

Craneage: The craneage requirements for the entire project were critical in developing the construction methodology and phasing of the works. Multiple heavy and bulky lifting operations were required to construct the new Upper Crescent Wastewater Pumping Station. These included lifting 25-ton excavators into and out of the cofferdam, lifting of the 10-ton steel plate wall shuttering/formwork used to cast the circular pumping station structure, pulling of the sheet piles with vibro hammer and installation of the large precast roof beams and slabs.

A 280-ton crawler crane was selected as the suitable crane for our project needs. The imposed loading of the crawler crane also had to be considered in the design of the cofferdam, due to the loading it would place onto the cofferdam structure. Early planning of the detailed and complex construction methodology streamlined the construction process and avoided any major delays or unforeseen complexities in the construction of the new WwPS.

Concrete pours & precast roof: Due to the proximity to Comber River/Strangford Lough and the findings from the ground investigation during the ECI, it was anticipated that a high-water table would be encountered with steady flow of groundwater infiltration. However, the reality was much better than expected. The sheet pile installation was much more effective at cutting off groundwater infiltration than anticipated, significantly reducing the dewatering resources.

The new WwPS is a 15m internal diameter reinforced concrete structure with internal dividing wall, which splits the structure into the stormwater storage tank and foul pumping station wet well. The concrete structure was cast in situ in 15 steps. Concrete pours starting with the base slab and followed by five 1.35m high kicker pours to contain the internal benching. [caption id="attachment_26821" align="alignnone" width="1200"] (left) Reinforced concrete pumping station structure under construction and (right) roof beam and completed RC structure - Courtesy of GRAHAM[/caption]

The main walls were then cast; the remaining 7.5m height of the structure in five wall pours (four quarter radius pours and the internal dividing wall pour). The walls were cast using custom adjustable radius steel formwork shutters. Every effort was taken to maximise the speed and ease of construction, and the larger pours reduced the number of construction joints within the wastewater retaining structure.

The roof beams were precast on site due to their size and weight; 1m deep cross sections weighing approximately 20 tonnes each. A steel platform was constructed on site, on which each of the roof beams was cast while the tank structure was under construction.

The roof slabs were set into pockets cast into the top of the tank walls, with a H-shape beam over the wet well to accommodate large access covers for the three submersible pumps and two mixer pumps. The roof deck consisted of 22 precast slabs, which were cast off site due to insufficient space on site. The largest slab weight was 14 tonnes.

Inlet manhole: Upper Crescent WwPS receives incoming flows from the Comber Catchment via three gravity sewers entering from three corners of the site. The sewers all combine in the new inlet manhole, which was constructed adjacent to the new WwPS. Within the new inlet chamber, there are two manually operated penstocks. These can be used to direct flows into the wet well or storm tank as required, via the two independent pipelines shown. This provides NI Water operatives the opportunity to isolate the wet well during period of maintenance and utilise the storm tank to receive the incoming flows. [caption id="attachment_26820" align="alignnone" width="1200"] (left) Roof beam and completed RC structure and (right) incoming sewers - Courtesy of GRAHAM[/caption] Turn of flows

The commissioning of the new pumping main required a temporary shutdown of the WwPS to disconnect the existing pumping station and connect the new pumping station to the pumping main. This critical activity required meticulous planning and detailed coordination between the contract team and NI Water.

The work was programmed for forecasted dry days to ensure flows were reduced during the operation. Regular commissioning meetings were held with NI Water and the contract team in advance of the proposed works. Detailed discussions concerned the proposed works, programme and specific requirements in a systematic approach to confirm with relevant stakeholders that all eventualities had been considered before the works were progressed.

The final connection to the rising main was programmed to take place at night, during an 8-hour period when incoming flows would be at a minimum. The works would also be very weather dependant, as wet weather would dramatically reduce the amount of time available to complete the connection. The additional stormwater in the combined network could potentially overwhelm the on-site storage more rapidly than the team could complete the connection.

[caption id="attachment_26829" align="alignnone" width="1200"] Wet well pumps - Courtesy of GRAHAM[/caption] The existing Upper Crescent WwPS was taken out of service on 26 February at 23.00. The inlet pipe to the new WwPS was opened and the existing pipeline to the old WwPS isolated. The existing pumping station wet well was pumped down to its lowest possible point possible to provide maximum storage. Then approximately 500m of 450mm HDPE diameter rising main was drained back to the existing pumping station wet well. The new pumping station was used to provide additional on-site storage of 687m3. The team worked through the night and the rising main connection was completed by 05:00 the next morning. Commissioning

Once the pumping main connection was completed, the new Upper Crescent Wastewater Pumping Station became operational and a 28-day trial period to verify the station’s functionality/reliability to the client commenced. During the 28-day trial, the existing wastewater pumping station was methodically demolished, down to the basement levels ensuring that the new WwPS was not affected.

The excavation was backfilled with engineered fill to ground level in preparation for final hardstanding construction and landscaping, which was completed during the final weeks of construction.

[caption id="attachment_26823" align="alignnone" width="1200"] Demolition of the existing WwPS - Courtesy of GRAHAM[/caption] Community engagement

Upper Crescent WwPS is located at the end of a cul-de-sac and corner of a public park. Ahead of construction commencing on site and throughout the work, a number of public relations activities were employed to inform the many stakeholders about the project and in particular the piling activities, removal of spoil from site and turn of flows when commissioning the new pumping station. These included: regular briefings to local elected representatives; one-to-one meetings with stakeholders; letter drops; house calls; school visits to the site; press releases and social media announcements.

During the project’s construction phase, GRAHAM needed some additional lands to enable the construction of the new Upper Crescent WwPS, as the pumping station would occupy most available lands within the existing site. The construction team where therefore required to obtain a section of the neighbouring Muckers Park owned by Ards and North Down Borough Council to form a temporary site compound and provide additional land for a crane platform. The crane platform required a diversion of footpath used by the local Park Run.

Upper Crescent WwPS: Timelapse video

Early engagement with Comber Park Run enabled successful diversion of footpaths for the weekly race and patrons of the park. The diversion had to be artificially lengthened, to ensure that the length of the park run circuit was not shortened. During the construction of the new WwPS, GRAHAM provided refreshments for a number of park runs, distributing NI Water reusable water bottles and provided a cake for the Park Run’s 10th Anniversary.

On completion of the WwPS, the park was reinstated to its original configuration and handed back to the Ards and North Down Borough Council. Upper Crescent WwPS was operational from 27th February 2025 with site-wide testing and commissioning of the plant successfully undertaken for handover to NI Water in June 2025.

Portadown is a large town in County Armagh, Northern Ireland located approximately 24 miles south-west of Belfast and nestled along the banks of the Upper River Bann. Over recent years, Portadown has transformed from a historically industrial town into a modern hub with a rapidly growing logistics sector and retail environment attracting high footfall and continued economic growth. Meadow Lane Wastewater Pumping Station (WwPS), located within the central retail area of the town, was constructed in 1966. The site forwards flow to a downstream gravity sewer system before subsequently flowing into the southern inlet of Seagoe WwPS, approximately 1.5 miles away. Need for upgrade

Meadow Lane WwPS was identified as requiring significant base maintenance interventions due to the antiquated nature and condition of existing pumps, pipework and control assets which require a high level of maintenance; thus, imposing a risk of potential significant failure. The following observations were made on site:

Existing pumps showed signs of extensive wear (supported by observed power loadings). Control motors were identified as being installed pre-1975. The existing motor control centre (MCC) did not satisfy current asset standards.

NI Water Technical Support had also advised of occurrences of flooding within the dry well as a direct result of leaking pumps which required reactive maintenance and tankering operations.

Additionally, following completion of the 2007 Portadown Drainage Area Study, Meadow Lane WwPS was identified as a required output. It was outlined to NI Water the need for the existing Meadow Lane WwPS to deliver flow to full treatment (FFT) if the upstream network spill performances are to meet the Northern Ireland Environment Agency (NIEA) requirements for the Meadow Lane catchment area.

[caption id="attachment_26864" align="alignnone" width="1200"] Secant piles with reinforced concrete capping beam - Courtesy of BSG Civil Engineering Ltd[/caption]

Model updates were completed in 2016 following flow monitoring surveys, and further inspections confirmed that the existing pumps could not deliver the required FFT. Therefore, the five CSOs identified by the NIEA as Unsatisfactory Intermittent Discharges (UIDs) could not be closed without significant intervention/upgrade at Meadow Lane WwPS. Model updates were also completed in 2020 to reflect predicted future 2040 flows.

The NIEA had identified the following five CSOs as UIDs:

Meadow Lane One CSO. Meadow Lane Two CSO. Portmore Street CSO. Clonavon Avenue CSO. Meadow Lane Health Centre CSO.

Failure to address spills would lead to potential prosecution by NIEA and associated reputational damage due to potential serious sewage flooding and pollution to the Annagh River, Upper River Bann and the surrounding area.

Early Contractor Involvement (ECI)

NI Water appointed BSG Civil Engineering Ltd as the main contractor under an NEC3 Early Contractor Involvement (ECI) Contract. As the main contractor, BSG provided multi-disciplinary design, project and supply chain management and civil engineering and MEICA works for the contract from inception to completion.

The ECI phase allowed BSG to align resources and integrate objectives with the client, NI Water, and project managers, McAdam, at an early stage to benefit overall project delivery. This allowed for enhanced collaboration, innovation, value, efficiency and reduced whole life cycle costs for the project.

[caption id="attachment_26863" align="alignnone" width="1200"] Liner wall formwork using Peri Rundflex - Courtesy of BSG Civil Engineering[/caption] Meadow Lane WwPS: Supply chain - key participants Project delivery: BSG Civil Engineering Ltd Civil, hydraulic & process designer: McAdam Temporary works design: MEA Ltd Earthworks: BSG Civil Engineering Ltd Specialist piling contractor: Quinn Piling Limited Formwork: Peri UK Reinforced concrete works: ONCCE Ltd Tunnelling contractor & TBM: B&W Tunnelling Ltd Open cut pipe installation: Phace Contracts Ltd Open cut pipe installation: O’Neill Contracts & Plant Hire Open cut pipe installation: AG Wilson Civil Engineering Groundworks: RMG Metalwork & FST designer/installer: RJ Smyth Engineering Precast roof beams: Macrete (Ireland) Ltd Precast roof slabs: Creagh Concrete Precast concrete pipes: Tracey concrete Screens: Eliquo Hydrok Ltd Submersible pumps & float switches: Xylem Water Solutions Flow meters: Siemens Control panels: Motrol Ltd Kiosks: Quinshield Ltd Primary drivers

The purpose and drivers of this project were as follows:

Ensure a reduction in spill frequency and volume through the provision of adequate storage facilities within the Meadow Lane catchment area. Closure of the five unscreened UIDs (identified by the NIEA) and subsequent provision of sewer upgrades in the upstream catchment to transfer flows from the closed UIDs and provide online storage. Resolution of three DG5 properties within the Meadow Lane area. Essential replacement of Meadow Lane WwPS with provision of a screened emergency overflow. [caption id="attachment_26865" align="alignnone" width="1200"] Pouring of 400m3 base slab - Courtesy of BSG Civil Engineering[/caption] What the upgrade involved

The upgrade of Meadow Lane WwPS and the associated network was a large-scale infrastructure project located within a complex urban environment. The project saw:

The installation of 380m of 1,500mm diameter tank sewer approximately 7m below ground level. The installation of 350m of sewers ranging in diameter from 300mm to 1500mm via open cut techniques in depths ranging from 2m to 7m below ground level. The demolition of the existing Meadow Lane WwPS. The construction of a new inlet chamber, wet well pumping station and 1,500m3 storage tank at the existing Meadow Lane WwPS site. The installation of a new MCC panel and associated glass reinforced plastic (GRP) kiosk. The installation of three 37kW foul pumps and two 9kW hydro ejectors. The installation of three screens from Eliqua Hydrok Ltd. The closure of five unscreened UIDs. 1,500mm tank sewer installation

Meadow Lane is an arterial route through Portadown town centre, providing access to several shopping facilities, restaurants and medical facilities. It was identified that significant traffic management, potentially involving lengthy diversions, would be required for an extended period to undertake the installation of the 1,500mm diameter tank sewer along Meadow Lane using open-cut methods.

[caption id="attachment_26861" align="alignnone" width="1200"] Pipejacking operation within launch pit - Courtesy of BSG Civil Engineering[/caption]

Therefore, it was determined that a trenchless pipejacking method of installation would be adopted to install the full 380m of 1,500m tank sewer. Additionally, the use of a tunnel boring machine (TBM) would allow for a reduced potential environmental impact due to the reduction in surface disruption, dust, noise and vibrations; and provide enhanced safety for construction staff due to the automated installation process.

Due to the unstable ground conditions, a closed face slurry system was used as this technique allowed the area around the TBM to be supported with a pressurised bentonite mix, preventing collapse and ensuring stability. During this process the excavated material was pumped from the face of the TBM, through the installed tunnel, to an above-ground separation system where the excavated material was removed from the bentonite mix, allowing it to be recycled and returned to the tunnel face for reuse.

The tunnelling operation was undertaken in three stages with launch and reception pits installed to facilitate each drive stage alongside ancillary tunnelling operations; drive stages varied in length between 70m to 230m. Due to the varying and difficult ground conditions present along the proposed tunnelling route, launch pits and reception chambers were installed using a combination of both segmental shafts and traditional cofferdams.

Storm retention tank, inlet chamber & wet well pumping station

The storm retention tank, inlet chamber, and wet well pumping station was designed as one structure. Due to the difficult ground conditions, high water table and proximity to existing NI Water assets, it was determined that secant piling would be implemented as a means of providing temporary support to facilitate safe excavation.

[caption id="attachment_26853" align="alignnone" width="1200"] Installation of concrete beams - Courtesy of BSG Civil Engineering Ltd[/caption]

A specialist piling contractor was utilised to install 140 (No.) 750mm diameter secant piles to a depth of 18m below ground level before the installation of a reinforced concrete capping beam to complete the excavation support system. Once installed, the secant piled wall provided a watertight structure. Localised dewatering within the secant piled structure was used to ensure excavated material remained dry and suitable for reuse on site. Approximately 3500m3 of material was removed from the 21m diameter, and 10m deep excavation.

Construction of the storm tank consisted of a 1200mm deep reinforced concrete base, a 400mm thick external liner wall, and a 500mm internal dividing wall. The liner wall formwork was designed as a single sided system using Peri Rundflex and constructed in two lifts to meet temporary works restrictions.

The roof structure was constructed using 1250mm by 900mm precast beams and 450mm thick precast hollow core slabs. Structural screed was then poured to complete the structure.

The complex roof slab arrangement consisted of a variety of construction techniques including in situ reinforced concrete elements, precast concrete primary and secondary beams, structural steel beams and hollow core precast slabs. The complete design of the roof structure was provided by five different design companies working in collaboration ensuring each element adhered to the tight tolerances required for accurate placement.

Open cut sewer installation

Six sections of open-cut sewer installation were completed in this scheme. Boxed systems were used to provide temporary works excavation support for the pipe installations. Sewers were installed to depths of up to 7m below ground level in sites with limited working room. Traffic flows were controlled by complex traffic management systems.

[caption id="attachment_26858" align="alignnone" width="1200"] Open cut sewer installation at Manhole No. 4 - Courtesy of BSG Civil Engineering Ltd[/caption] MEICA installation

The MEICA installation was completed in two stages. A new MCC was installed within the new GRP kiosk, and once all building services were installed, the NI Electricity supply was diverted to the new MCC panel which then backfed a supply to the existing MCC panel until turn of flows in April 2025.

Once civils construction had sufficiently advanced, the second phase of the mechanical fit out commenced, where the three 37Kw foul pumps and associated pipework were installed from the foul pumping station to the flow meter chamber. A 250mm Siemens MAG 5100w was then installed to measure the outgoing flow-rate. Two pump stools, 9Kw hydro ejectors and pipework were installed within the storage tank to jetwash the tank during storm events.

Three Eliquo Hydrok Ltd screens were installed into the following areas:

Inlet screen chamber: 600l/sec Mecmex™ screen. Foul pumping station overflow screen chamber: 70l/sec static Peak Screen™. Storage tank overflow screen: 264 l/sec static Peak Screen™. [caption id="attachment_26855" align="alignnone" width="1200"] Pump remote enclosures and actuators - Courtesy of BSG Civil Engineering[/caption] Additional construction challenges

The main challenges faced during the delivery of Meadow Lane WwPS were a combination of site-specific constraints, environmental constraints and equipment/asset failures during the construction period. Some of the additional challenges experienced during the construction stage have been outlined below.

Portadown has been identified within the Northern Ireland Flood Risk Management Plan as an area of significant flood risk, due to regular fluvial flooding from the Upper River Bann and its tributaries. The most recent significant flood event was recorded in 2024, which saw substantial flooding across the entire work site. This fluvial flood event led to a halt in works on site for approximately one week and caused damage to plant.

The 500mm diameter outlet pumping main from the existing Meadow Lane Pumping Station ruptured on two occasions during the construction programme. To carry out the repair on the outlet pumping main, both Meadow Lane and Annagh WwPS had to be shut down and seven tankers were mobilised to transfer effluent to other NI Water treatment facilities. BSG Civil Engineering Ltd was able to utilise the newly constructed storm tank to create temporary storage and prevent any out-of-sewer flooding during the emergency repair works. BSG received positive feedback from NI Water on how these critical network emergency repair works were managed and rectified in a safe, collaborative and timely manner.

[caption id="attachment_26857" align="alignnone" width="1200"] (left) Fluvial flooding event in 2024 within the site compound, and (right) utilising the new storm tank for temporary storage following an outlet pumping main failure - Courtesy of BSG Civil Engineering Ltd[/caption] Stakeholder communication

NI Water and the project team recognised the potential negative impacts which could arise from undertaking such a large-scale project within a busy town centre location and from an early stage embarked on a strategic communications strategy to ensure key stakeholders were informed of the works and kept updated throughout.

As part of the public relations programme the project team and NI Water Communications held early briefings with a range of stakeholders including elected representatives, town centre management, chamber of commerce, health care centre, council, roads authority, landowners and local businesses.

In addition to the numerous one-to-one meetings, letter drops were carried out in advance of each section of road works commencing and press releases issued to the local media to advise the wider public of traffic management. Variable message boards were erected on main routes and large-scale project boards helped to convey the huge investment being made by NI Water and the resulting benefits for the public.

Key project milestones were publicised along with facts and figures relating to the construction work and tunnelling exercise.

Regular project updates and lookahead bulletins were issued to stakeholders to keep them up to date on progress and advise them of future traffic management requirements. Town centre management were invited to site at key stages of the project to view progress and hear firsthand about the benefits the NI Water investment will bring to Portadown.

BSG provided a point of contact for operational queries and this, along with NI Water’s wider stakeholder communications, helped to ensure a smooth-running construction programme.

[caption id="attachment_26859" align="alignnone" width="1200"] Completed Meadow Lane WwPS (July 2025) - Courtesy of BSG Civil Engineering Ltd[/caption] Outcomes

NI Water directed significant financial investment into upgrading the existing sewer network and Meadow Lane WwPS within the Meadow Lane area of Portadown. The proposed works oversaw the closure of five CSOs within the Meadow Lane WwPS catchment area through connection into the new 1,500mm tank sewer alongside the resolution of three DG5 properties.

The collaborative effort between NI Water, BSG Civil Engineering Ltd and McAdam resulted in the smooth completion of the programme and successful testing, commissioning and handover to NI Water in July 2025. The benefits of the new infrastructure will be realised almost immediately through a reduction in spill frequency and volume within the Upper River Bann and Annagh River.

This project showcased the capabilities of NI Water, BSG Civil Engineering Ltd and McAdam to coordinate and undertake sensitive high-risk activities such as a large-scale turn of flow without issue and within a complex urban environment.