Search
Nominate/Submit Case Studies
Job Board

Gilbert Gilkes & Gordon Ltd

Keltie Water Hydro Scheme

Keltie Water Hydro Scheme at Trossachs National Park, Scotland

Gilbert Gilkes & Gordon Ltd

KEY STATISTICS

  • Customer: Drummond Estate
  • Turbine type: HCTI Twin Jet Turgo
  • Number of turbines: 1
  • Power output: 1MW
  • Net head: 78m
  • Flow: 1626 l/s
  • Runner diameter: 25”
  • Speed: 600 rpm

At over 1,800 sq km and as one of the UK’s largest National Nature Reserves, the Trossachs National Park attracts over 4 million visitors each year. There are currently 38 operational, run-of-river hydro schemes within the Park, of which Keltie Water is one of the larger, privately developed examples.

The 1MW Keltie Water hydro scheme is Gilkes’ second machine for the Drummond Estate. Gilkes worked closely with consultants, Allt Energy, and civil engineers, Campbell of Doune Ltd, throughout the early stages of the project – ultimately selecting a 25” twin-jet Turgo as the most suitable machine for the scheme.

The faster running nature of the Turgo, along with its broad efficiency characteristics and low profile, all fitted well with the scheme’s hydrology and planning constraints. The scheme has two intakes, the main intake being located on a dam formerly owned by Scottish Water, from which the scheme only abstracts when the dam spills. The second intake is a conventional run of river intake which highlights the importance of the Turgo’s flat efficiency curve.

Courtesy of Gilbert Gilkes & Gordon Ltd

Courtesy of Gilbert Gilkes & Gordon Ltd

The Turgo is particularly suited to this site with its ability to operate across a flow range of ~1.63m3/s to 0.15m3/s with a nett head of 78m, and while running at 600rpm. In contrast to a slower running vertical machine (which would require a considerably taller building) the simplicity, high speed and lower cost of the Turgo also allowed a lower profile stone built Powerhouse to be sited sensitively, resulting in a scheme that is nicely absorbed by the surrounding landscape.

Scope of supply

  • 25” Twin Jet Impulse Turbine
  • Main Inlet Valve
  • Synchronous Generator
  • Lube Oil System
  • Control & Switchgear Panel
  • Hydraulic Control Module
  • Head Level Sensor
  • Control & Power Cabling
  • Building Services
  • Transformer
  • Installation & Commissioning
  • Servicing for duration of warranty
Courtesy of Gilbert Gilkes & Gordon Ltd

Courtesy of Gilbert Gilkes & Gordon Ltd

Although large by UK standards, the Turgo turbine at Keltie Water shares its advantages with considerably higher output machines abroad. Gilkes has supplied over 1000 Turgos to over 40 countries, with some examples generating in in excess of 7.5MW from a single machine.

Gilkes provide a comprehensive service and maintenance package not only to the Keltie scheme but also schemes across the Trossachs from our recently opened Scottish service centre in Callander, dedicated to serving the Trossachs and surrounding areas.

Gilkes continues to make substantial investments in advancing the Turgo design today – more than 100 years after the company patented the design in 1919.

 


 

For more information: Gilbert Gilkes & Gordon | +44 (0)1539 720028 | www.gilkes.com


 

For More Information, contact us at http://www.gilkes.com

Field Service Engineer (Fort William)
Gilkes has an exciting opportunity for an enthusiastic and motivated Hydro Field Service Engineer (Fort William) to join our well-established engineering organisation, based in Fort William, Scotland. As part of a busy service team and reporting to the Field Service Supervisor, you will play a key role in providing front line customer support.The ...
Field Service Engineer (Invergordon)
Gilkes has an exciting opportunity for an enthusiastic and motivated Hydro Field Service Engineer (Invergordon) to join our well-established engineering organisation, based in Invergordon, Scotland. As part of a busy service team and reporting to the Field Service Supervisor, you will play a key role in providing front line customer support.The ...
Hydro Fitter
We are recruiting for a fitter to join our hydro team. An exciting opportunity has arisen for a Fitter to join our well-established engineering organisation, based at our head office in Kendal, Cumbria. Reporting to the Fitter Supervisor, you ...

Field Service Engineer (Fort William)

Apply Now
Sectors: Mechanical Engineering
Categories: Project Delivery, Site Engineers
Locations: Scotland
Apply by: 11 Mar 2026
Contract: Full Time
Gilkes has an exciting opportunity for an enthusiastic and motivated Hydro Field Service Engineer (Fort William) to join our well-established engineering organisation, based in Fort William, Scotland.

As part of a busy service team and reporting to the Field Service Supervisor, you will play a key role in providing front line customer support.

The Service Engineer plays a key role in maintaining customer assets to the highest levels The role has the following key elements:

  • Troubleshooting – ability to quickly & effectively analyse and solve problems under pressure
  • Emergency response – provide after-hours support (call-out) when required
  • Safety – follow all on-site rules and regulations

Responsibilities Include:

  • Performing troubleshooting, repair, maintenance and routine inspection of hydro-electric turbines and ancillary equipment
  • Providing emergency response, after-hours support when required
  • Liaising with other internal departments to ensure excellent levels of customer service
  • Generate service and technical reports and be capable of working within a ‘permit to work’ environment is required
  • Familiar with the following principals: Mechanical, Electrical, Hydraulic & Control Systems

For full details and to apply, please visit our careers page on the link provided.