Nominate/Submit Case Studies

Become a Featured Company

George Green (Keighley) Ltd

Founded in 1900, George Green are mechanical engineers specialising in the fabrication of steel pipework and structural steelwork.

We predominantly serve the water industry, supplying all aspects of work including:

CARBON/STAINLESS PIPEWORK Bends | Duckfoot Bends | Lobster Backs | Equal Tees | Reducing Tees | Con Reds | Flat Top Tapers | Manifold & Bellmouths | We can also offer competitive alternative designs to Ductile Iron Pipework.
BRIDGE SCRAPERS: The rotating half bridge scraper is designed to remove settled sludge and scum from circular settlement tanks, which rotates about a central pivot and its outer end is fitted with an end carriage which carries the bridge drive and wheel assemblies.
PRESSURISED STORAGE CONTAINERS: We produce a range of pressurised storage and transport containers for the safe handling of very expensive spare parts (turbine rotors and pump impellors).

We have our own 10,000 sq ft facility and our service covers all mainland UK, European and worldwide markets.

We have a range of accreditations:

ISO 9001– 14001 – 45001.
CE Marking BS EN 1090.
DWI Approval for Stainless Steel Pipework.

Embsay WTW (2024)

Embsay Water Treatment Works is a standalone 24 ML/d water treatment works operated by Yorkshire Water (YW) and located in the Yorkshire Dales National Park, providing clean water to over 15,000 people in Skipton and surrounding areas. The existing works comprises of clarifiers, rapid gravity filters and a chlorine contact tank with associated chemical dosing. […]

Melton Mowbray STW (2024)

Construction of a new EBPR process stream operating in a UCT configuration and updating existing assets to improve the quality of the effluent

Project Pipeline - County Durham & Tees Valley (2024)

Update on construction of a large diameter strategic water main including a challenging crossing of the River Tees

Sluvad WTW (2024)

Removing manganese and iron through the first UK water industry application of jet mixing for coagulant mixing at a water treatment works

Faringdon to Blunsdon Trunk Main Phase 2 (2023)

The water network in the western end of the Thames Valley Supply Area is dominated by local borehole water sources. Over time, population growth coupled with general environmental drivers to reduce reliance on groundwater sources in sensitive chalk stream areas, Thames Water has sought to improve supply resilience and deployable output by linking local sources […]

Lower Barden Reservoir (2023)

Lower Barden Reservoir is the lower of two reservoirs located near Bolton Abbey within the Yorkshire Dales National Park. The reservoir is an impounding reservoir with a crest length of approximately 640m and a maximum height of 28m with a capacity of 2.23 Mm3. The overflow is located on the right-hand side of the embankment […]

Newthorpe STW (2023)

North-west of Nottingham and separated by the River Erewash, two of Severn Trent’s sewage treatment works are situated within 2.5km of each other; part of the legacy of the times of the public statutory undertakers. Heanor Milnhay STW in Derbyshire has a dual-stream process, with part of the flows going through trickle filters and the […]

Tees & Central Strategic Pipeline: Phases 1 & 2 (2023)

With approximately 60km of new 800/900mm pipeline required to replace the existing potable water mains, some of which are over 150 years old, the Tees and Central Strategic Pipeline will directly improve water quality, network resilience and operability within the Tees Network. The pipeline will serve approximately 50,000 properties and link a number of strategic […]

Anglian Water’s Strategic Pipeline Alliance (2022)

While the east of England is attracting people like no other part of the UK, it is also the driest area of the country – a threat to its success that Anglian Water is determined to overcome. The Strategic Pipeline Alliance (SPA) comprises, Farrans, Mott MacDonald Bentley, Costain and Jacobs, who are delivering one of […]

Bewdley Bank Service Reservoir (2020)

The Hereford Water Network is dependent on a single source of supply from the River Wye and Dŵr Cymru Welsh Water identified a need to assess the resilience of the network to maintain customer supply during any future loss of source supply events. The resulting hydraulic assessment identified the requirement to increase the available storage […]

BRP - Raw Water Project - Birmingham Resilience Project (2020)

The Birmingham Resilience Project (BRP) is designed to provide a backup source of raw water from the River Severn to the water treatment works that serves Birmingham. During planned or unplanned outages of the primary water source, the raw water system will abstract water from the River Severn between October and March and supply 117 […]

Ketford Borehole Pumping Station (2020)

Severn Trent’s Ketford Borehole Pumping Station (BPS) is a critical source which feeds into the Bromsberrow BPS, where the water is blended before being pumped into supply. The pumping station was vulnerable to outage largely due to having a single operational borehole. There were three boreholes at the site (BH1, BH2 and BH3), which historically […]

BRP - Treated Water Project - Birmingham Resilience Project (2019)

Since the beginning of the 20th century, raw water has been conveyed 118km from the Elan Valley in Wales, under gravity by aqueduct, to the water treatment works (WTW) in Birmingham for treatment and supply to the population of the city. The aqueduct has been in continuous service for over 100 years and requires some […]

Pegswood STW (2019)

Pegswood Sewage Treatment Works (STW) is a Northumbrian Water (NW) site located 16 miles north of Newcastle-upon-Tyne and 2 miles north-east of Morpeth, Northumberland. The treatment process comprised inlet screens, flow control and storm separation to storm tanks, two Dortmund pyramidal settlement tanks, four biological percolating filters, with a circular humus tank discharging final effluent […]

Seaham STW - Inlet Works Upgrade (2019)

Seaham Sewage Treatment Works (STW) receives and treats raw sewage from Seaham and the surrounding area. Constructed in phases between 1996 and 2001, the works serve a population of over 23,000 people. The works were originally built to ensure compliance with the Bathing Water Directive, as the site discharges directly into the North Sea via […]

BRP - Elan Valley Aqueduct (Nantmel and Frydd Wood) - Birmingham Resilience Project (2018)

At the height of the industrial revolution, Birmingham’s population was booming. Between 1800 and 1900, the city had grown substantially. An innovative solution was needed to provide its residents and industries with safe drinking water. James Mansergh had identified the Elan Valley as a source for water. With Birmingham located so far in land, the […]

BRP - Elan Valley Aqueduct (Severn Siphon) - Birmingham Resilience Project (2018)

The Elan Valley Aqueduct (EVA) is a Victorian water structure built between 1893 and 1904. The aqueduct transports water entirely by gravity from the Elan Valley in Wales to Frankley Water Treatment Works in Birmingham, and comprises a combination of cut and cover conduits, siphons and tunnels. Over 100 years on and this aqueduct still […]

BRP - Raw Water Project - Birmingham Resilience Project (2018)

The Birmingham Resilience Project aims to deliver a new water supply into Birmingham to allow extended planned maintenance shutdowns of the Elan Valley Aqueduct (EVA) as well as providing a back-up for any emergency events. The new supply will be brought into use every other year, for up to 50 days during months of October […]

BRP - Treated Water Project - Birmingham Resilience Project (2018)

Since the beginning of the 20th century, the Elan Valley Aqueduct (EVA) has conveyed raw water 118km from the Elan Valley in Wales under gravity to Frankley Water Treatment Works (WTW) in Birmingham. The treatment works was inaugurated at the same time as the EVA and has treated water, to supply the residents and industries […]

Hanchurch Service Reservoir (2018)

A ‘product-based’ approach to service reservoir construction is revolutionising the way MMB are constructing a new multi-million-pound distribution service reservoir (DSR) for Severn Trent Water (STW). To boost productivity in the construction process, the new 43ML reservoir is being treated as a ‘product’, manufactured largely off site in controlled-conditions, before being assembled on site near […]

Prioress Mill Raw Water Pumping Station (2018)

Prioress Mill Raw Water Pumping station (RWPS) is located in Rhadyr, near Llancayo, Monmouthshire, on the south bank of the River Usk. It abstracts at a rate of up to 318 ML/day, and is the primary supply to Llandegfedd reservoir, which then feeds Sluvad Water Treatment Works (WTW). Prioress Mill RWPS has been identified by […]

Rivelin WTW - Sirofloc Replacement: Part 2 (2018)

Yorkshire Water Services (YWS) committed to the Drinking Water Inspectorate’s (DWI) compliance date of 31 December 2017 for beneficial completion of a new clarification process at Rivelin WTW. The £25m scheme required the design and construction of a large 82.5MLD buried treatment plant (80m long, 40m wide and 14m high) on the border of the […]

Davyhulme WwTW Modernisation Project (2017)

Davyhulme WwTW is United Utilities’ largest wastewater treatment works, which serves over one million people in Greater Manchester; it has been undergoing a £200 million modernisation process, which started on site in 2015 and is now close to construction completion. The upgrade is required to ensure it complies with tighter discharge consents and the impact […]

Masonry Reservoir Spillway Refurbishment (2017)

The innovative use of a spray applied structural concrete ‘shotcrete’ lining is a cost and programme effective alternative to ‘traditional’ in situ or precast concrete repair, or re-construction of masonry reservoir spillways. This construction methodology was used successfully across three masonry spillways of varying geometries to prolong the operational life of the ageing structures, whilst […]

Camels Head WwTW (2016)

South West Water’s Camels Head WwTW, is located in a residential area of Plymouth, Devon and serves a population equivalent (PE) of 41,500. Capital maintenance is required due to issues with current full flow to treatment (FFT) compliance, which is constrained by the primary settlement tanks (PSTs) capacity, odour from the site, inlet screening and […]

Grafham WTW Resilience (2016)

Grafham WTW is located near Huntingdon and serves a population of 829,000, including Northampton, Huntingdon and Bedford. It is estimated that approximately 614,000 of these would be affected by a major outage at Grafham WTW. As part of Anglian Water’s AMP5 Final Business Plan programme, the Grafham WTW Resilience scheme was identified to mitigate the […]

Jackson’s Edge Service Reservoir - Compartment 1 (2016)

Jackson’s Edge Service Reservoir (SR) is a water supply scheme that will provide increased security to the network through the provision of a new 18Ml capacity, twin compartment SR on the site of the existing 103 year old SR. The £7.5m project has adopted a Design for Manufacture and Assembly (DfMA) approach, saving approximately £2m […]

Lee Tunnel - Flow Transfer System (2016)

Thames Water’s Lee Tunnel will create a cleaner, healthier River Thames by capturing combined sewer overflows at Abbey Mills Pumping Station, preventing 16 million tonnes of stormwater and sewage from being discharged into the River Lee each year. Up to 385,000m3 of stormwater and sewage will be stored in the 7km long tunnel and transferred […]

Leeds Flood Alleviation Scheme (2016)

Historically, Leeds has not benefited from formal flood defences and is sited in a catchment where the river can rise rapidly in response to rainfall. There are records of flooding dating from the 19th century and in the recent past; prior to the scheme commencing the river had come close to flooding Leeds city centre […]

What we do:

Civil Engineering: Pipeline Contractors | Structural Steelwork

Plant & Equipment: Pipe Accessories | Pipe Coatings | Pipe Joints | Pipes | Scrapers | Stainless Steel

Process Engineering: Mechanical Contractors | Pipework Contractors