Search
Nominate/Submit Case Studies
Job Board

AUMA Actuators Limited

New Remote Control Actuators for Oxford STW CHP System

AUMA Actuators Limited installed eight new SQ10 open/close actuators with AC01.2 microprocessor-based controls, featuring a wide range of operating functions at Thames Water’s Oxford STW
By: AUMA Actuators Limited
Published: September 25, 2023

Courtesy of AUMA Actuators Limited

A major sewage treatment works near Oxford serving over 214,000 people is benefiting from the installation of a number of new actuators that enable valves at the site’s Combined Heat and Power (CHP) plant to be opened and closed from a centralised control panel, as well as by remote control. Previously the system was controlled by an air operated system that was prone to failure in icy conditions.

AUMA Actuators Limited installed eight new SQ10 open/close actuators with AC01.2 microprocessor-based controls, featuring a wide range of operating functions at Thames Water’s Oxford sewage treatment works. Thames Water site technicians now have a system that they can operate from the locally mounted AC01.2 control heads, with the ability to control valves remotely if required.

Colin Borrows, Operations Manager, AUMA Actuators Limited, says:

“AUMA’s innovative AC controls are your perfect solution if the application requires self-adapting control functions, data logging, a configurable interface or if a valve and actuator are to be integrated into a Plant Asset Management System. On this install the AC01.2 units were mounted on a framework  separately from the SQ10 actuators, via Auma standard wall mount brackets due to high level locations of the actuators on each of the CHP engines.

“AUMA’s AC01.2 has been designed placing particular emphasis on user-friendliness and ease of integration of actuators into the DCS. The large graphic display simplifies the menu-controlled programming of the actuator, with the option to use AUMA CDT via wireless Bluetooth connection. For fieldbus connections, AC programming can be performed from the control room.”

As part of the project AUMA manufactured and installed two power and control distribution boards and terminal marshalling boxes mounted to unistrut frames. AUMA Service Technicians attended site to assist with the commissioning and installation of these units.

AUMA’s SQ range of actuators provide reliable open-close duty and positioning duty rated for class A and B or types of duty S2 – 15 min. Actuators can be combined with various controls, from simple open-close control to the micro-controlled version with logging of operating data or fieldbus interface. SQ actuators feature high enclosure protection, high quality corrosion protection and wide ambient temperature ranges.

 

For more information contact AUMA Actuators Ltd | +44 (0) 1275 871141 | www.auma.co.uk

 

About AUMA Actuators Limited

Based in Clevedon, near Bristol, AUMA Actuators Limited is the UK subsidiary of the global AUMA Reister GmbH and Co., the world’s largest manufacturer of electric valve actuators, operating on every continent, with 2,300 employees in 30 locations.

AUMA is the world leader in modular electric valve actuators and gearboxes, supplying a full range of actuators right across the process, water, petrochemical and energy sectors. AUMA manufactures robust, reliable equipment with sophisticated control and connectivity options, backed up with exceptional service support.

AUMA benefits include:

  • Rugged and reliable products.
  • Double-sealed actuator housing to protect the electronics.
  • Tough and resilient finish.
  • Powerful, with multi-turn actuators from 7 to 59,000 ft lb (10 to 80,000 Nm) and thrust acceptance up to 900,000 lbs (4,000 kN) and part-turn actuators from 18 to 498,000 ft lb (25 to 675,000 Nm).
  • Worldwide availability and support.
  • Modular, user-friendly design.

 

 

Hanningfield WTW - Washwater System (2023)
Located 5 miles south of Chelmsford, Hanningfield Water Treatment Works (WTW) is the largest works operated by Essex & Suffolk Water (ESW). The WTW, which has a peak output of 220 MLD, draws water from the 26,000 ML Hanningfield Reservoir to supply a large part of south Essex. The washwater system is over 50 years […]
case-study
Bicester STW (2022)
In recent years the Oxfordshire town of Bicester had undergone significant growth in its population with a further potential growth of 37% in the near future. In late 2019, Thames Water implemented the need for a growth scheme to upgrade various elements of the works to accommodate the forecast population increase. Bicester STW is a […]
case-study
Blackburn and Darwen WwTWs (2022)
Both Blackburn WwTW and Darwen WwTW discharge final and storm effluent to watercourses that are tributaries of the River Darwen, feeding into the River Ribble estuary and the bathing waters of the Fylde coast in the Irish Sea. At Blackburn WwTW, which provides treatment for a population equivalent (PE) of approximately 400,000, construction of the […]
case-study
Burnley WwTW Catchment Strategy (2022)
The Burnley Integrated Catchment Scheme is one of United Utilities largest AMP7 projects with a value of over £60m which commenced in 2020. The project is being delivered by Advance-plus, a joint venture between MWH Treatment, J Murphy & Sons and Stantec UK; United Utilities’ framework construction delivery partner (CDP). In UK Water Projects 2021 […]
case-study
Carlisle WwTW (2022)
Carlisle WwTW lies within United Utilities’ north Cumbria region. The site is located to the north-west of Carlisle’s city centre, on the banks of the River Eden, and serves the city of Carlisle. The treatment works receives domestic sewage, trade flows, and tankered imports, providing primary and secondary treatment prior to discharge to the River […]
case-study
Ellesmere Port WwTW: Essar Upgrade (2022)
The large industrial town of Ellesmere Port in Cheshire is experiencing population growth, thanks to good transport links and an array of employment opportunities. The local population is set to rise by a further 10% by 2036, to over 76,000, so upgrades to the Ellesmere Port Wastewater Treatment Works (WwTW) are necessary to cope with […]
case-study
Hanningfield WTW - Washwater System (2022)
Hanningfield Water Treatment Works (WTW) is the largest water treatment facility operated in the Essex & Suffolk Water supply area. It has been expanded over numerous phases and is currently in need of improvements to its washwater treatment plant in response to changing influent water quality. Hanningfield WTW draws water from Hanningfield Reservoir which is, […]
case-study
Keadby Terminal Assisted Outfall Pumping Station (2022)
Keadby Terminal Assisted Outfall (TAO) Pumping Station is at the end of an intricate system of rivers and pumping stations within the low-lying Isle of Axholme catchment in Lincolnshire. It was originally built in the 1940s to discharge water from three parallel channels known as the Three Rivers, into the River Trent during high tides. […]
case-study
Riding Mill Raw Water Pumping Station (2022)
When constructed in 1979, as part of the Kielder Transfer Scheme, Riding Mill Pumping Station was the largest pumping station in Britain. Abstracting flows from the River Tyne, it enables Northumbrian Water (NWG) to transfer water from Kielder Reservoir to the Derwent, Wear and Tees rivers, whilst supporting the operation of Mosswood WTW. The site […]
case-study
Stoke Bardolph STW - Anaerobic Digestion (2022)
Stoke Bardolph Sewage Treatment Works (STW) is Severn Trent’s second largest STW and serves a population of c. 620,000. The site is also a major regional sludge centre, meaning it takes a high volume of sludge imports from other sites in the region. Stoke Bardolph has a sludge treatment capacity equivalent to a population of […]
case-study
Wing WTW (2022)
Wing WTW is part of the Anglian Water network, located in the county of Rutland in the East Midlands. The treatment site originally opened in 1977 and was then expanded to include a granular activated carbon (GAC) system in 1989. Morcott WTW, which was commissioned in 2010, is adjacent to Wing with a combined area […]
case-study
Barkers Haugh STW (2021)
Barkers Haugh STW receives wastewater from a population of approximately 36,000 people. Due to a ratcheting of the Environment Agency consent in response to population growth (+4000) and a tighter total iron consent of 4mg/l an upgrade of the works was required. A total of £8m was invested to improve the quality of the effluent […]
case-study
Beenhams Heath WTW (2021)
South East Water’s Beenhams Heath WTW serves the surrounding area of Maidenhead and Bracknell. Raw water is pumped via submersible borehole pumps from two off-site locations at Hurley and Waltham. The Hurley flows are directed through a membrane filter before passing through the GACs and combining with the Waltham flows via a collecting tower and […]
case-study
Blackburn and Darwen WwTWs (2021)
Blackburn WwTW was constructed in the 1960s and principally treats domestic crude sewage from the Blackburn catchment, with two major additional contributions; a high strength trade effluent from the InBev brewery and an ammonia rich return liquor flow from the sludge treatment plant. The key river water quality/water framework directive parameters within the revised environmental […]
case-study
Cog Moors Advanced Anaerobic Digestion Facility (2021)
Welsh Water’s sludge strategy is to treat 97% of sludge using advanced anaerobic digestion (AAD) technology. The Cog Moors AAD facility was constructed to supplement the existing facilities at Cardiff and Afan in South Wales along with the recently constructed Five Fords facility in North Wales. AAD gives the benefits of: Meeting the Enhanced Sludge […]
case-study
Hawkhurst South WwTW (2021)
The NEP Quality drivers for the Southern Water’s Hawkhurst South WTW are to meet the new iron and total phosphorus discharge permit limits by 31/12/2021, a tightened ammonia permit by 31/03/2025, and to maintain compliance with all aspects of the current discharge permit at lowest whole life cost. In addition, the population equivalent is set […]
case-study
Heigham WTW (2021)
Heigham Water Treatment Works (WTW) has supplied clean water to the City of Norwich for more than 100 years. The treatment works supplied an average 42 Ml/d of water into the Norwich Public Water Supply Zone serving a population in excess of 200,000. The £36m scheme was the largest capital investment project within Anglian Water’s […]
case-study
High Frequency Risk Reduction: Garstang Road (2021)
In the PR19 agreement, water companies were encouraged to provide resolution to long-standing flooding problems being experienced by customers – but allowed a less prescriptive approach on the actual projects defined in the Water Company’s (WCo’s) Price Review submission. This new process allowed WCo’s a degree of discretion on the number and frequency of flooding […]
case-study
Ludham Licence Reinvestment (2021)
Ludham WTW supplied 2.1 million litres a day (MLD) of treated water to 2,464 properties in Ludham and Martham whilst originally being fed by Ludham boreholes, with emergency supply coming from East Ruston boreholes. This £7.6m scheme addressed area growth and abstraction licence challenges by combining different schemes to deliver an efficient solution for customers […]
case-study
Mosswood WTW (2021)
Northumbrian Water (NWL) provides water supply and sewerage services to a population of 2.7 million in the north east and 1.8 million in the south east of England, delivering 1,100 MLD of drinking water. Potable water treatment works vary from small groundwater sources to large surface water treatment facilities such as Mosswood Water Treatment Works […]
case-study
SWELL - Warrenpoint WwTW (2021)
Warrenpoint is a small town in County Down, situated on the northern shore of Carlingford Lough, approximately 7 miles south-east of Newry. The shared water of Carlingford Lough marks the border between Northern Ireland and Ireland. Due to its scenic beauty and coastal location, Warrenpoint is popular with day trippers and the town can experience […]
case-study
Trusthorpe Outfall (2021)
The sea defences along the coast of Lincolnshire mainly comprise of concrete seawalls fronted by sandy beaches providing flood protection to the low-lying coastal flood plain, which extends up to 15km inland and has a recorded history of inland flooding as far back as the 13th century. The Lincolnshire Open Coast Flood Risk Management Scheme […]
case-study
West Huntspill WRC Bathing Waters Improvements (2021)
West Huntspill Water Recycling Centre (WRC) is a Wessex Water facility situated south of Highbridge in West Somerset. This environmentally sensitive site is within a National Nature Reserve and adjacent to a Site of Special Scientific Interest and a Special Protection Area (Bridgewater Bay and the Severn Estuary). The facility serves a catchment of 62,000 […]
case-study
Whitlingham Water Recycling Centre (2021)
Investment in Whitlingham WRC was identified by Anglian Water to ensure that the site remains resilient for Norwich’s growing population and support the environment of the River Yare; part of the Norfolk Broads. A full review of the existing assets and support to carry out on-site testing to understand the process limitations, identified potential opportunities […]
case-study
Barrow Hill Shaft (2020)
The Thames Water Ring Main (TWRM) in London is an 80km long, 2.5m diameter tunnel built between 1988 and 1994 to take water from five treatment works and transfer flows via pumping stations housed in shafts along the route. It is a major part of London’s water supply infrastructure and carries an average daily flow […]
case-study
Battersea Shaft Pumping Station (2020)
The Thames Water Ring Main (formerly the London Water Ring Main) is a major part of London’s potable water supply infrastructure. Originally constructed between 1988 and 1993, it forms a 50-mile ring of mostly 2.54 m (100”) diameter concrete pipeline to transfer potable water from water treatment works in the River Thames and Lea catchments […]
case-study
Billericay, Danbury & Hollingsworth Road Water Towers (2020)
The low-pressure standard (formerly called DG2) is defined by Ofwat as a pressure of less than 10 metres at a flow of 9 litres per minute when measured on the customer side of the water company stop tap. Any properties in breach of this threshold are recorded on the low pressure register and the number […]
case-study
Blackburn and Darwen WwTWs (2020)
Blackburn WwTW, located at Samlesbury near Blackburn, serves a population equivalent (PE) of approximately 400,000 and discharges final and storm effluent to watercourses that are tributaries of the River Darwen, feeding into the River Ribble estuary and ultimately into the bathing waters of the Fylde coast in the Irish Sea. Over the last 12 months, […]
case-study
Bolton-upon-Dearne WwTW (2020)
Bolton-upon-Dearne Wastewater Treatment Works serves approximately 25,000 customers in Rotherham. Faced with an Environment Agency consent to reduce ammonia at the works, Yorkshire Water has undertaken a £12.3m, 14-month project to construct a brand new inlet works and install a new treatment process that will greatly improve the quality of water being released back into […]
case-study
Bran Sands Gas to Grid Project (2020)
Northumbrian Water Group (NWG) have two sludge treatments centres, at Bran Sands STW on Teesside and at Howdon STW on Tyneside, which together process 100% of the sewage sludge arising from within its operating region, using an advanced anaerobic digestion (AAD) process. The resultant renewable biogas is converted into biomethane for export to grid. The […]
case-study
Bray Keleher WTW (2020)
The Bray Keleher Water Treatment Works (WTW) abstracts and treats a maximum of 45 Ml/d of river Thames water and is located on Monkey Island Lane, Bray, between Windsor and Maidenhead. The works is of strategic importance in maintaining supplies to the western region of South East Water (SEW). As part of the final determination […]
case-study
Brentwood STW (2020)
Brentwood Sewage Treatment Works (STW) is one of Thames Water’s medium sized treatment works. The site is located to the north-east of London between Harold Wood and Brentwood in Essex. The STW treats foul water from the catchment serving West Brentwood, Warley and Pilgrims Hatch. It currently serves a population of 36,500 which will increase […]
case-study
Church Wilne WTW (2020)
Situated on the Derbyshire/Nottinghamshire border, Church Wilne WTW serves 600,000 Severn Trent (ST) customers in the East Midlands. Built in 1967 to extract and treat 27 ML/day from the River Derwent, the works has been extended twice to 135 ML/day meeting the needs of both a growing population and increased water quality standards. However, the […]
case-study
Coppermills WTW (2020)
Located in the Lea Valley, North London, Thames Water’s Coppermills WTW is the largest water treatment works in North London, treating and supplying clean water to around 4 million consumers in Greater London and the City. During certain times of the year, plant output is reduced by algal blooms with the rapid gravity filters (RGFs) […]
case-study
East Worthing WwTW (2020)
Located close to the English Channel, East Worthing WwTW serves a population of 140,000 in a largely urbanised area in West Sussex. In peak wet weather conditions, up to 71 million litres can flow through the site in a day. Due to the urban nature of the catchment, and some large and relatively shallow gradient […]
case-study
Ellesmere Port WwTW: Essar Upgrade (2020)
The large, industrial town of Ellesmere Port in Cheshire is experiencing population growth, thanks to excellent transport links and an array of employment opportunities. The local population is set to rise by a further 10% by 2036, to over 76,000, so upgrades to the Ellesmere Port WwTW are necessary to cope with increased throughput. The […]
case-study
Foss Barrier (2020)
The Foss Barrier and associated pumping station is a vital asset in the City of York’s flood defences and was constructed in the 1980s in response to severe flooding five years earlier. In flood conditions, a mechanical gate can be lowered to stop rising waters in the River Ouse from flowing back up into the […]
case-study
Langford WTW (2020)
Langford Water Treatment Works (WTW) is owned and operated by Essex and Suffolk Water (ESW), part of the Northumbrian Water Group (NWG). The treatment works, located near the town of Maldon, treats water abstracted from the nearby River Chelmer and River Blackwater. The river water quality changes greatly with rainfall, at times of excessive turbidity […]
case-study
Langsett WTW (2020)
Yorkshire Water’s Langsett Water Treatment Works (WTW) is located 17km north-west of Sheffield in South Yorkshire, on the edge of the Peak District National Park. The WTW treats raw water which is extracted by gravity from two upland impounding reservoirs at Langsett (adjacent to the WTW) and nearby Midhope (approximately 1km south-east of the site). […]
case-study
Oldham & Royton Integrated Strategy (ORIS) (2020)
United Utilities is the regional water company for the North West of England, delivering water and wastewater services to 7m people from Cheshire to the Scottish border. Oldham WwTW and Royton WwTW are two major wastewater treatment works located in Oldham, to the north east of Manchester. The Oldham and Royton Integrated Strategy (ORIS) project […]
case-study
Portaferry Road Newtownards Wastewater Pumping Station (2020)
Located on the edge of Strangford Lough, on the Ards Peninsula, Portaferry Road WwPS serves the eastern catchment of Newtownards, forwarding approximately 25-35% of the wastewater from Newtownards town to Ballyrickard WwTW, located approximately 3km away. Altogether Ballyrickard WwTW receives untreated foul effluent from six major pumping stations located within the Comber and Newtownards catchments: […]
case-study
Rathlin Island Borehole Project - Ion Exchange Plant (2020)
In summer 2019, Northern Ireland Water commenced upgrade works to the water supply on Rathlin Island, Northern Ireland’s only inhabited offshore island. The current public water supply on Rathlin Island is supplied from groundwater. It consists of a pair of closely located boreholes feeding a simple double cartridge type filtration system with sodium hypochlorite dosing […]
case-study
Syleham WTW (2020)
Essex and Suffolk Water’s Syleham Water Treatment Works is located in the north-east part of Hartismere in Suffolk. The works supplies water to the north side of Eye and to Fressingfield Water Tower, which in turn supplies approximately 4,000 properties (10,000 customers) throughout a number of villages. It was originally constructed in 1940 and raw […]
case-study
Anchorsholme Outfall Pumping Station (2019)
Anchorsholme Park is located on the coast 4 miles north of Blackpool Tower. The outfall pumping station project is the second of three phases contributing to improving bathing waters on the Fylde coast. The objective of the overall scheme is to complete the AMP5 obligations on the Fylde Coast of the ‘moving towards three spills […]
case-study
Bradan WTW (2019)
Located in South Ayrshire, Scotland, Bradan Water Treatment Works (WTW) has a capacity of 120 Ml/day, with an output of approximately 70 Ml/day. The existing treatment processes comprise aluminium sulphate coagulation, dissolved air flotation, primary filtration, manganese contactors, orthophosphate dosing, lime and disinfection. The works supplies a large area along the west coast of Scotland, […]
case-study
Blackburn and Darwen WwTWs (2019)
Both Blackburn WwTW and Darwen WwTW discharge final and storm effluent to watercourses that are tributaries of the River Darwen, feeding into the River Ribble and ultimately impacting on the bathing waters of the Fylde coast. Following on from the Blackburn and Darwen WwTWs (2017) article and Blackburn and Darwen WwTWs (2018) article, both published […]
case-study
Boughton STW (2019)
Boughton STW is a medium sized sewage treatment works serving a population equivalent of approximately 13,000 located about 8 miles south-east of Worksop in Nottinghamshire. As part of Severn Trent’s commitment to the Water Framework Directive (WFD) to improve the quality of waterbodies in the region within AMP6, Boughton STW was highlighted to accept a […]
case-study
Bray Keleher WTW (2019)
The Bray Keleher Water Treatment Works (WTW) abstracts and treats a maximum of 45 Ml/d of water from the River Thames and is located on Monkey Island Lane, Bray which is part way between Windsor and Maidenhead. The works is of strategic importance in maintaining supplies to the western region of South East Water (SEW). […]
case-study
Davyhulme WwTW Modernisation Project (2019)
Davyhulme Wastewater Treatment Works (WwTW) is United Utilities (UU) largest, serving over 1.3 million customers across Greater Manchester. Built in 1894, it has seen continuous development in wastewater treatment including the invention of the activated sludge process (ASP) by Ardern & Lockett in 1914. Incoming flows from the combined sewer network can reach 30m3/s, the […]
case-study
Foss Barrier (2019)
In December 2015, the most severe floods in a generation hit the City of York. As water levels rose to the highest recorded on the River Foss, they entered the main control building at the Foss Barrier, which forms an important part of the city’s flood defences, rendering the facility inoperable. The Foss Barrier and […]
case-study
Garreglwyd Raw Water Supply Main (2019)
Dŵr Cymru Welsh Water has an extensive network of rural water supply assets in North Wales, with numerous service reservoirs and many kilometers of pipeline. Emergency repairs or mitigation measures have arisen from both freeze-thaw conditions and dry weather over the past few years. During 2018 there were both extremes of cold weather and one […]
case-study
Ingoldisthorpe Water Recycling Centre (2019)
Ingoldisthorpe WRC was identified by the EA under ‘no deterioration’ as requiring additional measures in order to address the tightening of ammonia and phosphorus levels (1mg/l NH3-N and 4.5mg/l P) in order to sufficiently treat all required flow, meet discharge consents and maintain the quality of the receiving water bodies. The existing works serves a […]
case-study
Knostrop Sludge Treatment Facility (2019)
Over the last two decades the concept of municipal sewage being an expensive to treat waste stream has slowly become surpassed by renewable and sustainable opportunities that re-label wastewater treatment works as water resource recovery facilities (WRRF), sludge recycling centres (SRC) or sludge treatment facilities (STF) to name but a few. Incentivised by UK Government, […]
case-study
Ashford WwTW Sludge Treatment Centre (2018)
Ashford Wastewater Treatment Works is located in Kent alongside the M20 motorway, near the River Great Stour to the South of the Kent Downs (Area of Natural Beauty). The Town of Ashford has a population of approximately 110,000 people. The WwTW serves Ashford and surrounding areas and is supplied by five local pumping stations taking […]
case-study
Ballycastle Wastewater Project (2018)
The picturesque coastal town of Ballycastle is located on Northern Ireland’s scenic North Antrim Coast. This popular tourist spot attracts many visitors, who come to take in the beautiful scenery, as well as passing through on their trip along the famous Wild Atlantic Way. Visitors come from all over the world to see the nearby […]
case-study
Blackpool South Surface Water Strategy (2018)
The Blackpool South Surface Water Strategy is a £30m scheme aimed at improving bathing water quality along Blackpool’s golden mile. The project tackles the combined challenges of climate change, an aging Victorian sewer network, increasing urbanisation and a responsive catchment. The project’s objectives are the reduction in frequency and quality improvement of spills within the […]
case-study
Chalton WRC (2018)
Chalton Water Recycling Centre Water Recycling Centre (WRC) receives influent from the north parts of Luton with an average flow of 240 l/s and a population equivalent of 89,000. The plant has to treat all flows with no storm overflow. The existing works is fed under gravity by three inverted siphons and has seen peak […]
case-study
Cheddar Pumping Station (2018)
The Southern Resilience Scheme is a new £27m water infrastructure project that provides improved security of water supply to a population of approximately 280,000 people across Bristol Water’s supply area. The scheme comprises a new 30km ductile iron main of 600mm and 700mm diameters, as well as the upgrade of the existing pumping station at […]
case-study
Christchurch STW Inlet Rising Main Renovation (2018)
A burst occurred in a section of 400mm DI rising main within the curtilage of Wessex Water’s Christchurch sewage recovery works in Dorset. The works serve a population in the adjacent catchment of 59,000. The location of the burst was close to a bend in the main, beneath a large diameter primary sedimentation tank, and […]
case-study
Dalton Piercy WTW (2018)
Dalton Piercy Water Treatment Works (WTW) supplies an average demand of 32 Ml/d to ~45,000 properties and significant industrial customers in Hartlepool. The current site process includes UV disinfection, sodium hypochlorite dosing and orthophosphoric acid dosing. This article describes how Anglian Water’s @one Alliance successfully applied product-based delivery principles to the Dalton Piercy Manganese and […]
case-study
Deephams STW - A630 Major Upgrade (2018)
Thames Water’s Deephams Sewage Treatment Works (STW) is located in Edmonton, North London and treats a 989,000 population. Three drainage catchment areas of Lea Valley, High Barnet and Tottenham flow to the works, the ninth largest plant in the UK. The original effluent treatment process was built between 1956-1966 and had been updated at various […]
case-study
Fort Cumberland Sea Defences (2018)
Three of Southern Water’s underground storm tanks next to the historical Fort Cumberland have played a crucial part in helping to prevent homes in Portsmouth from sewage flooding during stormy weather. Although redundant, the old sea defences protecting the tanks needed replacing and strengthening, and ongoing maintenance is essential to preventing their contents polluting the […]
case-study
Glascoed WTW (2018)
Welsh Water’s Glascoed Water Treatment Works (WTW) is situated south of the village of Bodelwyddan in the county of Denbighshire. It was commissioned in 1994, with additions made in 1995 and 2009. The works supplies up to 20 Ml/d to customers along the North Wales coast. The works receives its supply of raw water from […]
case-study
Gouthwaite Impounding Reservoir (2018)
Built under the Bradford Corporation Waterworks Act 1890, Gouthwaite Impounding Reservoir (IRE) forms the lowest of a cascade of three reservoirs in Upper Nidderdale, all designed by their chief waterworks engineer. The upper two reservoirs, Angram and Scar House, supply water along the Nidd Aqueduct to Bradford. Gouthwaite IRE was built 11km downstream to provide […]
case-study
Great Dunmow Water Recycling Centre (2018)
Great Dunmow Water Recycling Centre (WRC) is located a few kilometres to the east of Stansted Airport in Essex and serves a population of approximately 10,000 people. Due to ongoing capacity limitations and operational issues in the existing works, Anglian Water elected to construct a new treatment plant on the site to serve the current […]
case-study
Highworth WwTW (2018)
Highworth Wastewater Treatment Works (WwTW) is located at Pentylands Lane, Highworth to the northeast of Swindon. The treatment works currently serves a population of approximately 10,000 customers, with an average daily flow of 1,720m3 per day and a peak flow of 55 l/s. The works is Royal HaskoningDHV’s first full-scale Nereda plant in the UK. […]
case-study
Knostrop Sludge Treatment Facility (2018)
The Yorkshire Water sewage sludge incinerator at Knostrop WwTW is approaching the end of its asset life in AMP7. This, along with high operating costs has driven a business need to review the long-term treatment of sludges in the Yorkshire/Leeds catchment. Following a strategy review, Yorkshire Water Services (YWS) decided to progress with conventional mesophilic […]
case-study
Minworth STW - Thermal Hydrolysis Plant (2018)
Minworth STW is Severn Trent’s largest sewage treatment works and serves a population equivalent of 1.75 million from Birmingham with full flow to treatment of 1,070Ml/d. The works treats sludge arising from a population equivalent of 2.3 million which is made up of indigenous sludge plus imported sludge from the nearby Coleshill STW and various […]
case-study
North Wales Sludge Strategy & Five Fords AAD (2018)
Welsh Water set out its vision in its Sewage Sludge Strategy 2040 how it intended to deal with the number one waste management challenge all water utility providers face, the sustainable management and disposal of wastewater sludges. With ever tightening nutrient and heavy metal limits on agricultural usage, and more pressure than ever for companies […]
case-study
Stanbridgeford STW (2018)
Stanbridgeford Sewage Treatment Works (STW), lies approximately one mile south of the village of Stanbridge in Bedfordshire and as of 2016, the population equivalent (PE) of the works was 15,305 and the domestic population served was 15,051. The treatment works discharge into the adjacent Ouzel Brook, a tributary of the River Great Ouse. Regulations from […]
case-study
Whittle Dene WTW (2018)
Whittle Dene Water Treatment Works is Northumbrian Water’s fourth largest treatment works with a deployable output of 118Ml/d, supplying 228,000 properties. Located in Northumberland, 13 miles west of Newcastle, it is a strategically important works to Newcastle, Gateshead, North Tyneside, South Northumberland and Tyne Valley regions. Raw water at the site comes from adjacent reservoirs […]
case-study
Woodgate Hill Service Reservoir No. 2 (2018)
Woodgate Hill Service Reservoir No. 2 (SR2) was commissioned in 1963, providing a total capacity of 269Ml and a throughput that equates to 20% of the regional water demand. The reservoir was built in to the hillside with an excavation of around 380,000m3. With a footprint of 47,000m2, at the time of construction, Woodgate Hill […]
case-study
Ambergate Strategic Service Reservoir Renewal: Phase 2 (2017)
The existing Ambergate Reservoir was commissioned in 1907 and formed a part of the Derwent Valley Aqueduct receiving water from the Upper Derwent Valley. Water treated at Bamford WTW is delivered to Ambergate Reservoir by gravity via the aqueduct. The existing reservoir had a capacity of 128Ml supplying water to the cities of Derby, Nottingham […]
case-study
Avonmouth Acid Phase Digestion Remedials (2017)
Wessex Water’s Bristol STW is the largest sewage treatment works within south west region, serving approximately a catchment of 1.1 million people. The works also accounts for more than 50% of region’s sludge treatment. It treats around 100 tonnes dry solid (TDS) per day of indigenous sludge as well as imported sludge to a compliant […]
case-study
Basingstoke Sludge Treatment Centre (2017)
The Basingstoke Sludge Treatment Centre (STC) incorporates liquid and caked, raw sludge import facilities together with thermal hydrolysis and anaerobic digestion plant which will process 53tDS/day of sludge from Basingstoke, Farnham, Fleet, Guilford and Newbury. This will fulfil Thames Water’s strategy to cease unsustainable liming activities at the four satellite sites up to the 2036 […]
case-study
Bickerstaffe Pumping Station (2017)
The Southport Demand Monitoring Zone (DMZ) comprises ten supply zones with a population of approximately 245,000 covering the majority of the areas of the District Councils of West Lancashire and Sefton. Southport DMZ suffers from a number of issues including (i) peak demand during the summer months (ii) population growth (iii) water management. To overcome […]
case-study
East Worthing WwTW (2017)
East Worthing WwTW in Lancing serves the Worthing and Sompting catchments in West Sussex, located on the south coast of England. The works provides treatment capacity to a population equivalent of 136,000, which is expected to rise to 155,000 by 2030. East Worthing WwTW is an activated sludge plant providing secondary treatment for flows up […]
case-study
Farlington WTW (2017)
Portsmouth Water’s Farlington WTW dates back to 1909 and provides potable water to more than 280,000 people and many businesses in the Portsmouth and Havant area. Farlington’s supply is derived from the springs, which are believed to be the largest spring source in Europe. In April 2015 Portsmouth Water issued a tender based on an […]
case-study
Heigham WTW (2017)
Heigham Water Treatment Works (WTW) is the main supply of water to Norwich and supplies an average of 42Ml/d of water sourced from the River Wensum at several locations. Potable water is pumped into the Norwich Public Water Supply Zone feeding a multitude of storage reservoirs, booster pumps and properties. The main raw water abstraction […]
case-study
Heybridge Sea Gate & Lock Gate Replacement (2017)
At the start of construction for the Hanningfield Raw Water Reservoir, an Act of Parliament The Hanningfield Water Order 1950 was passed with agreements put in place for the maintenance of the lock between the navigation company (Essex Waterways) and Northumbrian Water Group (NWG), parent company of Essex and Suffolk Water. NWG abstracts water from […]
case-study
Horsley WTW (2017)
Northumbrian Water’s Horsley WTW serves around 800,000 people in the Newcastle and Tyneside area. The original works was constructed in 1977 and last extended in 2003. It draws its supply from the nearby River Tyne at Ovingham and the Whittle Dene complex of reservoirs fed from Kielder Water. The existing works has a capacity of […]
case-study
Maltsters Rising Main (2017)
As part of the South West Water Delivery Alliance H5O’s capital improvements programme, the Maltsters Sewage Pumping Station (SPS) Rising Main was identified for improvement after seven historic bursts within the last two years. This rising main is situated near the picturesque village of Tuckenhay, Devon, on the Harbourne River which converges with the River […]
case-study
Minworth STW - Thermal Hydrolysis Plant (2017)
Minworth STW is Severn Trent Water’s largest sewage treatment works and serves a population equivalent of 1.75 million from Birmingham with full flow to treatment of 1,070Ml/d. The works treats sludge arising from a population equivalent of 2.3 million which is made up of indigenous sludge plus imported sludge from the nearby Coleshill STW and […]
case-study
Mogden STW (2017)
Mogden Sewage Treatment Works is the second largest in the UK. The first phase was built between 1931 and 1935 at a cost of £1.7 million and covers an area of 55 hectares. The facility treats wastewater from a population equivalent of 1.9 million across a 60 square mile catchment area of north and west […]
case-study
Whitburn Spill Reduction (2017)
Northumbrian Water is required to provide investment to reduce spills at Whitburn and St Peter’s, Sunderland in order to comply with the requirements of the Urban Waste Water Treatment Directive (UWWTD) by December 2017. Sunderland (north) is an urban catchment of predominantly residential properties and is home to Sunderland’s Blue Flag award winning beaches at […]
case-study
Wicklow Wastewater Upgrade Bundle (2017)
County Wicklow is situated on the east coast of Ireland, south of Dublin. Kilcoole WwTP is located off Sea Road and the surrounding topography is agricultural farmland. The WwTP at Kilpedder is a bordered by woodlands and private dwellings, while access to Redcross WwTP is by a caravan park in Redcross. All three sites are […]
case-study
Beckton STW (2016)
In May 2015 Thames Water Operations identified emergency works on Activated Sludge Plant (ASP) 2 at Beckton STW in east London. The work was necessary to address the asset health and resilience of the treatment works, meet performance commitments and ensure satisfactory sludge disposal. The project was a fast track design and implementation with early […]
case-study
Farlington WTW (2016)
Portsmouth Water’s Farlington WTW dates back to 1909 and provides potable water to more than 280,000 people and many businesses in the Portsmouth and Havant area. Farlington’s supply is derived from the springs, which are believed to be the largest spring source in Europe. Raw water is chlorinated at the spring source pumping stations. At […]
case-study
Clear All
New AUMA Actuators Keep Water in Welsh Town’s Taps Flowing
Water supplies to over 3,000 residents in the Welsh seaside town of Tywyn will continue to flow uninterrupted thanks to new state-of-the-art, remotely controlled electric actuators installed by AUMA Actuators Limited.
Product News
AUMA Goes Green with Commitment to Net Zero
Investment in a range of renewable energy technologies by an electrical actuator supplier based near Bristol is reaping returns through reduced energy costs and meeting sustainability goals, saving over 236 tons of CO2 and generating more than 420 MWh of energy
Company News
AUMA Actuator Upgrade at Anglian Water's North Walsham WTW
An AUMA actuator that was originally installed back in the 1980s, when big hair was the style of the day and new romantic bands like Duran Duran and Spandau Ballet were top of the charts, has been replaced after over 40 years in service
Product News
Thames Water chose AUMA Actuators for Hampton WTW
Thames Water has selected AUMA Actuators Limited to upgrade a pair of actuators situated off an access road to a yacht club near the company’s Hampton WTW - one of Thames Water’s largest sites built in the 1850s0s
Product News
AUMA Actuators' SLA with Anglian Water's Extended to 2028
AUMA Actuators Limited (AUMA UK), a world leader in electric valve actuation technology, has successfully extended its Service Level Agreement (SLA) with Anglian Water until 2028
Contract Awards
AUMA Actuators' Commit to Continued Fast-Track Actuator Delivery
A UK-based supplier to the water industry is committed to fast-track product delivery for customers that sees UK stock actuators despatched within five working days from receipt of order
Product News
AUMA Actuator Installation at Old Windsor STW
A sewage treatment works that sits on an island in the middle of the River Thames, which was once the site of an important palace of the Saxon Kings, is now home to a new automated AUMA actuator installation
Product News
New Remote Control Actuators for Oxford STW CHP System
AUMA Actuators Limited installed eight new SQ10 open/close actuators with AC01.2 microprocessor-based controls, featuring a wide range of operating functions at Thames Water’s Oxford STW
Product News
AUMA Actuators Wins 2-Year Service & Actuator Repair Framework with United Utilities
AUMA UK’s new framework with United Utilities covers provision for the maintenance and repair of a wide range of actuators - both on and off site - as well as technical and telephone support, and training
Contract Awards
AUMA Actuators Adds Scottish Water Framework to Growing List of Successes
Scottish Water, providing drinking water to 2.46 million households and 150,000 business customers in Scotland, has awarded a framework for the supply and service of electric actuators to AUMA Actuators Limited (AUMA UK), a world leader in electric valve actuation technology.
Contract Awards
  • Company Profile
  • Post Description
  • Photo Gallery
  • References
  • Videos
  • Press Releases
Contact Info
Generation House, Yeo Bank 3, Kenn Road, Clevedon, North Somerset BS21 6TH
01275 871141
Email Us
Visit Website